CJ Classics Engine Fan Blade 6-Blade 17" V8
CJ Classics Engine Fan Blade 6-Blade 15" V8 is rated out of 5 by 6.
- 17" Diameter
- 6-Blade Design
- Silver Finish
- Sturdy And Lightweight
You save 10%
Rated 4 out of 5 by arizonafastback from Good fan with lots of air flow, a little pricey I bought this fan a couple years ago and used it until I recently switched to an electric fan. This fan works well, I had a lot of trouble with spacing when I first got it, it does have a different thickness than the OEM fan, so you will probably need a new spacer. This fan generates lots of air flow, which is its job, but one a belt driven fan, more air flow means more horsepower being taken away from the engine, so keep that in mind. If you are looking at buying a fan, shroud, and new spacers to try to solve a cooling problem I really recommend going with an electric fan setup for a couple bucks more, CJs has some great kits at good prices around $200, which is close to what you will spend on a fan, shroud, and spacers (plus you can earn a few horsepower back). Still a good product, just a little expensive.
Date published: 2017-06-09
Rated 5 out of 5 by 67jim from Good fit. Bought this to replace the OEM 4 blade after I installed AC on my '67. Good fit. Good finish. Looks stock.
Date published: 2016-05-19
Rated 5 out of 5 by schwartzie2000 from It Really Sucks! I chose this product over others that have a tendency to flex as I wanted to make certain under high RPM's that it wouldn't contact any of my accessories. It did not disappoint and it moves A LOT of air. No more overheating issues with my factory original copper radiator.
Date published: 2019-05-08
Rated 5 out of 5 by Jrockdfw from 73 bronco Needed smaller metal fan after vintage air install. This fan fit perfect - modified shroud for a/c install otherwise all good. Cools well - fits well - would recommend.
Date published: 2016-12-14
Rated 5 out of 5 by Tomh from nice Looks and fits great. I had a four blade fan, this helped my overheating problem. It looks like it could be factory.
Date published: 2019-06-27
Rated 5 out of 5 by LEEB from FAN looked for a ridged fan and found this one, it fits well and works fine
Date published: 2018-12-14
This says it's painted black and shows a pic of silver fan. Which is correct?
It is silver.
Date published: 2019-10-22
will this work on a reverse flow water pump on a 91 fox Mustang and a factory shroud and what spacer do i need
This will not work on your application.
Date published: 2019-08-28
The fan I current have measures 16" in Dia. Will a 17" work with my 68 Mustang. My radiator is a 20".
It will fit but you would have to check fan shroud clearance if you are using one.
Date published: 2018-10-17
Can you upload a clearer picture of the mounting information (red/orange sticker in the third picture) which includes the recommended distance from radiator and crank?
I'll pass this along to our photographers, but we typically focus on new products and products without photos first, so it might be awhile.
Date published: 2015-04-24