Battery Apron Passenger Side 1965-1966

CJ's Part Number: M116

Regular Price: $26.99

Special Price: $24.29

1418947200 23197
Earn 26 RPM Points What's this?
1418947200 1420070400
On Sale: End of Year Blowout!
M116 Play Battery Apron Passenger Side 1965-1966 Video 1

Product Description

Passenger Side Battery Apron for 1965-1966 Mustangs.

This battery apron attaches the front of the shock tower cover to the radiator support. Spot welds into place and comes pre-drilled for the fender mounting bolts.

The battery tray attaches to this apron.

Similar Mustang Parts

similar mustang parts More Mustang Fender Aprons  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
not so good
Quality in details is not good.
peter 66 coupe March 9, 2012
fit failure
Ended up cutting out the center section out as fender mt and frame rail areas did not match. All butt welding required. Perhaps premium might be better bent, but then again it just may be higher quality steel with incorrect bends. Not horrible for the price.
Steve January 16, 2012
Dont bother,
This part is made from low quality sheet metal,the bends do not match that of the engine compartment,just do yourself a favor and spend the extra couple of bucks and buy the premium.
Matt February 9, 2011
3 Results

You Might Also Like

Product Video

By Bill Tumas: We're here with our battery apron repair kit for your '64 through '66 Mustang Coupe, Convertible, or Fastback. Our kit comes with everything needed to replace that often rusted area on your early Mustang. The kit includes the correct style group-24 battery tray, a brand new hold down clamp, and all the hardware for the clamp as well.

The battery apron comes ready to weld on. It's predrilled for all of the additional accessories, as well as including hardware, pre-drilled holes for your fender mounting brackets, your battery terminal rubber shield, starter solenoid, precut hole for your wiring harness, and pre-drilled for the battery tray mounting hardware.

Here you can see our battery apron installed on a 1965 Mustang Coupe. You can see it welds to the side of the shock tower, top of the frame rail down here, and welds into your radio support in the front. The battery tray is going to mount right here in the front corner.

Because of battery acid, many times the battery tray is going to rust out first. It's a good opportunity to remove the battery tray and check your apron before you order replacement parts.