Battery Apron Passenger Side 1965-1966

CJ's Part Number:
35% of 100


  • Stamped Steel Construction
  • Black E-Coat Finish
  • OEM Style Replacement
  • Stamped Fender Mounting Holes
MSRP $51.99
You save 12%

Passenger Side Battery Apron for all 1965-1966 Mustangs.

If you're fixing up a classic 1965-1966 Mustang, then you're already well aware that many of its metal parts are probably rusty after decades of wear and tear. So if you've noticed that your battery tray is rusted through, then there's a good chance that your battery apron is also rusty. If that's the case, check out this Passenger Side Battery Apron, available from CJ Pony Parts!

Features & Benefits:
- Attaches to the Front the Shock Tower Cover to the Radiator Support
- Ready to Spot-Weld into Place
- Comes Pre-Drilled for Fender Mounting Bolts, Starter Solenoid, Mounting Hardware and Additional Accessories
- Made Out of 1006 Automotive Grade Steel
- Fits the Passenger Side Only

This Passenger Side Battery Apron attaches to the front of your Mustang's shock tower cover to the radiator support. Not only does it come ready to spot-weld right into place, but it also comes with holes pre-drilled for your fender mounting bolts, starter solenoid, mounting hardware and more! It's made out of sturdy 1006 automotive grade steel, and it's designed to fit on the passenger side of your Pony.

CJ Pony Parts is positive that you'll want your Mustang looking its best, so we offer thousands of body and sheet metal parts. Our body and sheet metal will allow you to repair damaged parts of your Mustang, or style your Mustang to have the perfect look to impress anyone who sees it!

Order a Passenger Side Battery Apron for your 1965-1966 Mustang from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We're here with our battery apron repair kit for your '64 through '66 Mustang Coupe, Convertible, or Fastback. Our kit comes with everything needed to replace that often rusted area on your early Mustang. The kit includes the correct style group-24 battery tray, a brand new hold down clamp, and all the hardware for the clamp as well.

The battery apron comes ready to weld on. It's predrilled for all of the additional accessories, as well as including hardware, pre-drilled holes for your fender mounting brackets, your battery terminal rubber shield, starter solenoid, precut hole for your wiring harness, and pre-drilled for the battery tray mounting hardware.

Here you can see our battery apron installed on a 1965 Mustang Coupe. You can see it welds to the side of the shock tower, top of the frame rail down here, and welds into your radio support in the front. The battery tray is going to mount right here in the front corner.

Because of battery acid, many times the battery tray is going to rust out first. It's a good opportunity to remove the battery tray and check your apron before you order replacement parts.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account