Classic Design Concepts Classic Front Chin Spoiler for all 2005, 2006, 2007, 2008 and 2009 GT Mustangs.
Give your Mustang GT a classic look with this Classic Design Concepts front chin spoiler, a complete replacement for the factory front fascia and reuses all factory attachments. This CDC Chin Spoiler is manufactured from high quality, injection molded, and OE-Style TPO plastic and designed to be installed right out of the box in a matter of minutes!
The chin spoiler will install easily using all factory mounting locations with supplied hardware. CDC includes detailed instructions and 3M Acrylic Bonding Tape to help properly finish the installation. If desired, the textured chin spoiler can also be prepped and painted to match the color of your 05-09 Mustang GT with the help of your local body or paint shop. CJ Pony Parts does NOT offer this chin spoiler with any paint options.
Features and Benefits:
- Complete Front Fascia Replacement
- Reuses all Factory Mounting Locations
- Includes Necessary Hardware and Installation Instructions
- Textured OE-Style TPO Plastic
- Aggressive and Classic Look
*The CDC Classic Front Chin Spoiler will ONLY fit the factory GT front bumper.
If you're looking to restyle and upgrade your Mustang, there's really only one company that can help with any need you have. Classic Design Concepts has dozens of Mustang styling and performance parts for your 2005-2009 Ford Mustangs. Choose from shaker systems, hoods scoops, exhausts and more from Classic Design Concepts.
Order the Classic Design Concepts Classic Front Chin Spoiler for your 2005, 2006, 2007, 2008 or 2009 Mustang GT from CJ Pony Parts today!
Similar Mustang PartsMore Mustang Front Spoilers
Product ReviewsWrite a review
What is shipping to Canada on the chin spoiler. My postal code is K9J6X3 Thank you
Does this piece fit on my 2006 V6 mustang?
Painted in a Race Red cost?
You Might Also Like
CJ's Low Price:$522.99
CJ's Low Price:$236.99
CJ's Low Price:$179.00
CJ's Low Price:$129.99
From:CJ's Low Price:$128.99
The spoiler comes in ABS plastic and is ready to install. This particular model's going to fit your 2005 through 2009 GT. CDC does offer a version for your 6 cylinder car as well. Comes with all necessary hardware including push-pins, adhesion promoter, and double stick tape.
This installation needs a Phillips head screwdriver, scissors, and a small piece of 80 to 220 grit sandpaper.
You want to start the install by getting your car off the ground. You can actually almost do it on the ground, but it's easier to have some height. 2 factory screw you're going to use are going to be right here on both sides. You can take the wheels off to get to them if you need to. We found by turning the wheel outward, you can get to them pretty easily. Now repeat the process on the other side.
Now we can prep the spoiler for installation. You want to put it upside down. This top edge here all the way across is where we're going to put our double stick tape. We're going to start with some sandpaper and scuff it a little bit before we start installing. I'm using 220, but anything 80 to like 220 should work fine. Just enough that you want to get it scuffed. After you scuff it, we're going to clean it with the supplied alcohol. We're going to take that same alcohol pad to the surface of the paint where the double stick is going to go.
Now, we'll use the supplied adhesion promoter and put that again where the tape is going to go on the edge here. You want to let this set up for about 30 to 45 seconds then we can install the tape. This does not have to go on the body of the car, just on the spoiler.
Now, we'll install the double stick tape, again starting at the edge here. We'll peel back a small corner and leave that out front. It’ll be easier to get the tape off once we install it on the car.
One of the things nice about the CDC spoiler is that it fits the car so well, you can install it and it will actually stay in place without any hardware. Makes it easy to line it up. Basically, start at this corner, get it up into place.
Now, we'll reinstall the factory screws and move along to the pushpins and finally the tape. I'll repeat the process on the other side. The pushpins are going to go through the spoiler into the factory holes on both sides. Line it up and just press it into place.
Now, we can remove the tape. Push down and slide your hand back and forth to make sure it's actually stuck to the bumper and actually sticks quite easily. Your installation is finished.
The Classic Design Concept chin spoiler looks so good on the front of our Mustang, you'd think it was a factory part. Fit and finish is excellent and the installation couldn't be easier. This is something you could easily do in your driveway in less than 30 minutes. You'll be back on the road in no time.