Firewall Insulation for 1967-1968 Mustangs.The firewall insulation reduces heat that may transfer to the interior from the engine bay. This insulation that covers the firewall can also reduce the amount of noise inside the car. Features perforated cutouts for the parts that get mounted through the firewall.
Installs with included clips behind and underneath the dash.
Product ReviewsWrite a review
Firewall Insulation 1967-1968 is rated out of 5 by 4.
Rated 1 out of 5 by jdharrell from Does not fit a '67 Every other product I've bought from CJ's has been fantastic. However, in attempting to install this firewall insulation on my '67 coupe I discovered it does not fit properly. As another reviewer states, it is too small. Several of the perforations have incorrect placement as well (e.g. fuse box), in addition to the clip fasteners not being perforated. Initially I thought it would just be a very tight fit and would require a bit of stretching, but it's short by at least 4".
Date published: 2015-06-26
Rated 1 out of 5 by Mustang Mel from It was too small. It was too narrow to stretch across the firewall. The only way to make it fit would be to cut it down the center and leave a 3 inch gap in the middle so that the holes would line up for the heater motor, clutch, speedometer, etc.
Date published: 2015-04-12
Rated 1 out of 5 by gyhooya from useless Totally wrong for a '67. Not long enough, and none let me repeat.. NONE of the holes match up.
Date published: 2015-07-29
Rated 5 out of 5 by stang67 from Great fit! Bought this about a month ago and it was heavy and will work perfect in the mustang.
Date published: 2015-01-08
What is the thickness and material for this insulation? Is it pre-formed?
You Might Also Like