Floor Pan Short Front Driver Side 1965-1970

CJ's Part Number: M106L
CJ's Low Price:
$33.99
1416614400 23157
Earn 33 RPM Points What's this?
1416873600 1417392000
On Sale: Up to 30% Off Sale!
Floor Pan Short Front Driver Side 1965-1970

Product Description

Driver Side Short Front Floor Pan for 1965, 1966, 1967, 1968, 1969 and 1970 Mustangs.

Are your floor pans suffering from rust in certain areas? This great replacement piece of floor is the section that starts at the seat platform and extends forward to the floor to firewall. Measures 22-1/2" x 24".

Please Note: Coupe and Fastback floor pans have the outside lip bent up, Convertibles were bent down. You may have to bend the outside lip to match your original floor pan or remove it and seam weld the pan to the rocker.

Similar Mustang Parts

similar mustang parts More Mustang Floor Pans  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
OK, but needs work
The side to side fit is spot on, but the fit at the front needs lots of massaging where it angles up to the toeboard. You either have to work the bend to meet the angle of the toeboard or move the whole thing forward, which causes problems with the rear of the pan. As for the front inside corner next to the tunnel, you're on your own to fab something up to fit there cuz this piece gives you nothing. But, for the price, it's not a bad piece of repair.
Tom October 29, 2014
Good but needs work
This pan is quality thicker steel and has all the proper holes. The only downside is the bend in the front where the floor pan angles up doesn't have the longitudinal bend as the original floor. I'll have to do some metal work of my own to make the correction.
Bryan October 26, 2014
The fit good.
The inside corners need to have metal in them.
george goetz October 21, 2014
Great
Floor reparations are not to be made of plain steel, like other welding repair jobs.
This floorpan with it's premade holes and ribs makes the bottom like is was, but waterproof.
Sascha June 27, 2014
Quality part
Part appears to be made with quality.
Frank June 16, 2014
5 Results