Ford Performance Front Brake Kit 6-Piston Brembo Conversion 15" Performance Pack EcoBoost/Base GT 2015-2017

Ford Performance: M-2300-V
MSRP: $1,759.00
CJ's Low Price:
$1,324.99
1481155200 61903
Add one of these parts to go along with your upgraded front brakes!
Earn 1324 RPM Points What's this?
Ford Performance Front Brake Kit 6-Piston Brembo Conversion 15" Performance Pack EcoBoost/Base GT 2015-2017
Ford Performance Front Brake Kit 6-Piston Brembo Conversion 15" Performance Pack EcoBoost/Base GT 2015-2017 Ford Performance Front Brake Kit 6-Piston Brembo Conversion 15" Performance Pack EcoBoost/Base GT 2015-2017 Ford Performance Front Brake Kit 6-Piston Brembo Conversion 15" Performance Pack EcoBoost/Base GT 2015-2017 Ford Performance Front Brake Kit 6-Piston Brembo Conversion 15" Performance Pack EcoBoost/Base GT 2015-2017 Ford Performance Front Brake Kit 6-Piston Brembo Conversion 15" Performance Pack EcoBoost/Base GT 2015-2017 Ford Performance Front Brake Kit 6-Piston Brembo Conversion 15" Performance Pack EcoBoost/Base GT 2015-2017 Play Ford Performance Front Brake Kit 6-Piston Brembo Conversion 15" Performance Pack EcoBoost/Base GT 2015-2017 Video 1 Play Ford Performance Front Brake Kit 6-Piston Brembo Conversion 15" Performance Pack EcoBoost/Base GT 2015-2017 Video 2
Ford Performance

Product Description

Ford Performance 15" 6-Piston Brembo Conversion Front Brake Kit for 2015, 2016 and 2017 Performance Pack EcoBoost Mustangs and Base GT Mustangs.

Does your S550 lack the braking power needed to get the job done at the track? Make sure to pick up this 15" 6-Piston Brembo Conversion Front Brake Kit from Ford Performance designed for your 2015-2017 Performance Pack EcoBoost or Base GT Mustang!

This brake kit is a direct-fit replacement for 2015-2017 Performance Pack GT Mustangs, but a direct-fit upgrade for Performance Pack EcoBoost and Base GT Mustangs. Adding this kit on your S550 will drastically increase your braking performance without losing the OEM-style look. Adding more surface area to the rotor surface while increasing the stopping power to 6-pistons of pressure will not only get you to stop quicker, but also dramatically reduce brake fade on those long track days.

Kit Includes:
- Pair of 15” Vented Brake Rotors
- Pair of Brembo 6-Piston Satin Black Aluminum Brake Calipers
- Front Production Brake Pads
- Pair of Front Dust Shields
- All Necessary Installation Hardware

Tech Tip: Although this kit will fit all 2015-2017 Performance Pack EcoBoost or Base GT Mustangs, vehicles equipped with an Automatic Transmission will require the Brake Booster and ABS Sensor from a Manual Transmission model to function properly. 

Make your Mustang stop on a dime with this Ford Performance 15” 6-Piston Brembo Conversion Front Brake Kit. Adding this kit from Ford Performance will help you keep an OEM look on your Mustang while providing a giant increase in braking power.

*Although this brake kit should work with the majority of 19” and 20” wheels on the market, we have no way to test every wheel combination available.
*Very few 18” wheels will be compatible with this kit due to clearance issues on the inside barrel of the wheel.

Please Note: This kit will work with Ford Performance (formerly Ford Racing) Wheel Kits M-1007K-M19XB and M-1007K-M19XS or a wheel with equivalent caliper clearance.

If you're looking for parts for your Ford Mustang, Bronco or truck, you should start by looking at the more than 600 premium parts that CJ Pony Parts offers from Ford Performance (formerly Ford Racing). By buying your Ford Performance parts from CJ Pony Parts, you know you're getting your high-quality parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years. When you buy your Ford Performance parts from CJ Pony Parts, you know you have a winning combination--this means dependable, quality care for your Ford vehicle!

Order a Ford Performance 15" 6-Piston Brembo Conversion Front Brake Kit M-2300-V for your 2015-2017 Performance Pack EcoBoost Mustang or Base GT Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More 5-Lug Front Disc Brake Kits  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Ford Performance Front Brake Kit 6-Piston Brembo Conversion 15" Performance Pack EcoBoost/Base GT 2015-2017 is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Didnt Fit So I bought these for my GT premium and installed them they fit and brakes stopped. It wasn't until I had to really use them they locked up and so I took it to the dealership they said they are not compatible with automatic the brake booster and a couple other things are different basically causing my abs not to work. So unless you have a Manual these wont work. Awesome Product though maybe the will come out with the automatic set up soon.
Date published: 2016-05-04
  • y_2016, m_12, d_7, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_M2300V, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 10.97ms
  • REVIEWS, PRODUCT

Product Questions

I would like to get ceramic brake pads. What brake pads can be used with this system?

Asked by: gtmatt55
We currently do not have any ceramic brake pads option for this brake kit.
Answered by: CJPP Dave
Date published: 2016-11-16

Will these wheels, M-1007-R18105 (Ford Racing Wheel - Boss 302R 18" x 10.5" Rear), clear these brakes?

Asked by: hulksmash
I've read in a few paces that they do and a few places they don't, but I cannot confirm either way. We have never had a set of those wheels in to test fitment first-hand. I recommend scouring the forums and doing some research among the HPDE crowd to see if someone can help you out. That would be a great setup though if it worked out.
Answered by: CJPP Dave
Date published: 2016-10-11

If posible use this brake pack whit the original california special 2017 wheels?

Asked by: I young
We have not tested those wheels for fitment. Worst case scenario, you may have to run a small 3-5mm wheel spacer for clearance.
Answered by: CJPP Dave
Date published: 2016-09-28

I have a 2015 ford mustang V6 convertible with the upgraded 18 inch forge wheels and the 051A package can these fit ? I have seen some of the installs you are doing to your V6 coupe but could you try to put these on the V6 with fords 18 inch wheels Please

Asked by: Mark3601
Although this brake kit should work with the majority of 19” and 20” wheels on the market, we have no way to test every wheel combination available. *Very few 18” wheels will be compatible with this kit due to clearance issues on the inside barrel of the wheel.
Answered by: rk cjpp
Date published: 2016-09-23

Dave, Bill, Is there an instruction video or manual? I'm guessing its 1. take wheel off, 2. caliper off, 3. disconnect lines, 4. rotor off, 5. then reverse and bleed? But it has been about 30 years since I did a brake job and that was on a 74 Camero ;-)

Asked by: ReverendQ
You are correct.
Answered by: rk cjpp
Date published: 2016-09-13

Hey Bill, I have a 2017 GT Premium with automatic (no PP) coming soon with black package wheels that appear to be the 19 inch anniversary edition wheels. Do you know if this brake package calipers will clear?

Asked by: ReverendQ
We have not tested that fitment, but I imagine that you should be fine. Worse case scenario, you may have to run a small 3-4mm spacer.
Answered by: CJPP Dave
Date published: 2016-09-12

Do you have a brembo brake for the rear wheels just like the gt350

Asked by: Hdboyz
No we do not.
Answered by: rk cjpp
Date published: 2016-09-08

Will these brakes fit a 2016 Mustang GT Convertible with the factory 20" wheels? Is there any mods that have to be done?

Asked by: Bill111
I have the foundry black 20" rims and they are compatible with this brake kit.
Answered by: Keiferson22
Date published: 2016-07-08
  • 2016-12-08T08:17CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_36
  • loc_en_US, sid_M2300V, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 44.2ms
  • QUESTIONS, PRODUCT

You Might Also Like

Product Video

Ford Performance Front Brake Kit 6-Piston Brembo Conversion 15" Performance Pack EcoBoost/Base GT 2015-2017 Video Transcript
By Bill Tumas: This is the 2017 EcoBoost Mustang we've built for this year's Ford Performance display at the SEMA Show. Because it's a SEMA car, we couldn't actually show you the car as we're building it. Now that they've debuted, we can show you all the installs we did to make this a true custom car. Today, we're going to show you how we installed our custom Brembo Brake Kit, which will fit all 2015-2017 Mustangs.

This Ford Performance Brembo Brake Kit is going to be an upgrade for all 2015-2017 Mustangs with the exception of the GT Performance Pack, which comes with these brakes from the factory. These are 6-piston calipers with a 15" rotor, and it will be a direct replacement for the factory brakes, with no modifications required. Includes 2 calipers, 2 rotors, 2 dust shields, and new hoses.

The Brembo brakes, like I said before, are part of the Performance Pack Option on the Mustang, and come in a black finish with a red lettering. We customized ours by painting them to match the car. The first step in installing them is to remove the original parts.

The first step in the removing process, is we're going to disconnect the brake line and then remove the brake hose from the car. Now, our car is a Performance Pack. This has the same brakes the GT has from the factory. These brakes would be a nice upgrade for a base model EcoBoost or a V6.

With the wand disconnected, now we can remove the 2 bolts that hold the caliper to the bracket. All right, with the caliper off the car, now we can remove the rotor. With the rotor off, we're going to remove the shield now that came with our factory brakes, as the Brembo ones come with a smaller one in the Ford Performance Kit.

Now, using the original hardware, we're going to install the new shield. They are side specific; make sure you grab the correct one. All right, now we can install our now Performance Pack rotors. We're going to use a lug nut trick as well here, to hold the rotor in place so we can install the new caliper. With the rotor in place, now we can install our Brembo calipers with the supplied hardware.

The Brembo bolt's going to be reused with the original calipers, so we're going to remove that and transfer it over to our new Brembo. And transfer the bolts over with the new line, using the supplied washers. We're going to put one on each side of the block. All right, with the caliper mounted, the last step is to connect the brake line to the hard line. Then you want to install the bolt that holds the bracket to the body. You're going to repeat the process on the other side. Bleed your brakes, and your installation is finished.

It was truly an honor for Ford to choose CJ Pony Parts to build this car for their Ford Performance display at this year's SEMA Show. With high quality Ford Performance parts, along with high quality parts from Anderson Composites and COBB, we built a Mustang that we are truly proud of. If you're lucky enough to be attending this year's SEMA Show, make sure you check out the Ford display and check out our Mustang.