Fuse Box Repair Kit for 1965-1968 Mustangs.This 10-piece kit provides all new clips to replace loose or corroded fuse holders.
Product ReviewsWrite a review
Fuse Box Repair Kit 1965-1968 is rated out of 5 by 5.
Rated 2 out of 5 by Max27 from fuse clips These fuse clips are heavier gauge which is impossible to crimp with any professional crimper into a hart shape. Soldering the wire into the clips is the best way. Difficult to put the clips into the fuse box, if the clip goes in incorrectly, impossible to take the clip out of the fuse box without braking the plastic tab that holds the metal tip portion of the fuse box. Just don't know why the manufacture could not make the clips thinner thickness like the original clips.
Date published: 2015-08-11
Rated 5 out of 5 by Boats021 from Rebuiders dream Very easy to use but one of the doubles needs the additional clip for the same look as the factory clip. The non insulated crimp connections worked well. I would recommend re-tinning your wires before you crimp and adding a little solder to ensure your electrical connection. This product really needs a video, tools and applications list.
Date published: 2015-04-03
Rated 5 out of 5 by Melinda from Worked great I rebuilt my fuse box because the old clips were corroded and broken. My lights are brighter and my wipers work much better than before. There is a youtube video that is very helpful, except I didn't want to remove my fuse box from the car so it was awkward to solder the lines under the dash. I think it was worth it.
Date published: 2015-08-23
Rated 5 out of 5 by Diggler from Perfect For Rebuild My old prongs were rusty and corroded so I decided to buy this kit and rebuild my fuse block. Great investment! All of my electrical components work perfectly now. The picture shows them as gold/copper, but mine came as silver. Not a big deal though.
Date published: 2015-02-11
Rated 4 out of 5 by scott65 from good works good. real classy looks. only bad is not knowing what crimper to use. be better if this was in the packaging.
Date published: 2015-02-17
what type of crimper must be used on these clips?
You can use the American Autowire Wiring Crimper/Splice Clip Tool 14-20 Gauge found here on the CJ's site or similar crimping pliers. Check the gauge of the wire and use the correct size crimp. The crimp on a multi-purpose stripper/crimper is the type that resembles the top of a Valentine's day heart, two arcs with a inverted peak on one side of the jaw and a flat or slightly round on the other side of the pliers. I would also suggest that you slightly bend the tabs that stick up inward towards the wire to make the crimp easier and it actually helps to make a better crimp.
Date published: 2015-03-19
Will this kit work for 1968 ford bronco
Yes, If it is the stock 5 fuse block. there are a few videos and other media that show how to repair/replace the clips.
Date published: 2015-03-19
how are the old wires attached to the new clips
You Might Also Like