Master Power Brake Booster Bendix Type 1967-1969

Master Power: BS9007
CJ's Low Price:
$300.99
1475107200 3187
Earn 300 RPM Points What's this?
Master Power Brake Booster Bendix Type 1967-1969
Master Power Brake Booster Bendix Type 1967-1969 Master Power Brake Booster Bendix Type 1967-1969 Play Master Power Brake Booster Bendix Type 1967-1969 Video 1
Master Power

Product Description

Master Power Bendix Type Power Brake Booster for all 1967, 1968 and 1969 Mustangs.

Add some additional stopping power to your Mustang with this power brake booster from Master Power. This is an all new Bendix type unit with a firewall bracket and push rod. This Bendix type replacement booster features an 8" diaphragm.

Power boosters use vacuum produced by your engine to assist in the application of force to the master cylinder. When you step on the pedal, a valve on the firewall side of the booster opens, allowing atmospheric pressure in. A hub assembly in the booster then transfers this force to the master cylinder increasing the braking power available and applied.

*The "tear drop" style push rod will not allow this to fit 1970 Mustang brake pedals.

The brakes in your Mustang are some of the most important parts in the car, yet often the most neglected. Many owners focus only on increasing performance and don't worry about the condition of the brakes that are going to stop their Mustang. No matter what year Mustang you have, CJ Pony Parts has the braking components that you need.

Purchase a Master Power Bendix Type Power Brake Booster for all 1967, 1968 and 1969 Mustangs from CJ Pony Parts today!

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Master Power Brake Booster Bendix Type 1967-1969 is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from A couple of things you need to know I am giving it 4 stars because it made me crazy for a couple of hours. See why. This unit is larger in diameter by an inch over my stock unit in my 1968 Mustang and covers about 50% of the main wire harness exiting the firewall. I will have to squeeze some protection for the harness to keep it from rubbing the insulation off. The other thing item to know is that no mounting nuts are provided for your master cylinder. No problem right? Big problem because it took me for ever to figure out that the studs are not 3/8-16 but 10 mm - 1.5 pitch. So while you are waiting for the UPS guy go to Home Depot and get a couple of nuts. I used the HW1191 master cylinder in the rebuild. This booster and that MC work together. The MC piston shaft depth is 1.05" and the booster shaft is .970". Just turn out the booster shaft enough to expose one thread in front of the lock nut and its a perfect (.985") fit. Or don't it will still be fine.
Date published: 2016-05-18
  • 2016-09-29T07:54CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_BOOSTER1, PRD, sort_relevancy
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 111.21ms
  • REVIEWS, PRODUCT

Product Questions

Will this Booster Work with the Modern Driveline Clutch Cable Conversion kit? The Bracket for the cable going through the firewall to the brake pedal from the Modern Driveline kit will not work with the Booster in the Master Power Brake Company's Kit.

Asked by: Cstrom92
This should work.
Answered by: rk cjpp
Date published: 2016-03-16

Will this work on 4 drum brake system with manual brakes?

Asked by: mez6266
It should work fine.
Answered by: CJ Pony Parts
Date published: 2015-04-28

HI, i look a power brake for a mustang 67 convertible do you have this in stock? send me please the price with a delive(ry to France please regards eric

Asked by: Kuster eric
At the moment, this part is available to ship within 5-7 days. To calculate shipping costs, please add the product to your shopping cart and proceed to checkout. In checkout, fill out your address info and you can see shipping options to your area with accurate costs.
Answered by: CJ Pony Parts
Date published: 2015-02-26

will this bolt right up to my firewall on my 68 coupe it is disk front, drum rear, automatic trans. with manual brakes . thank you 

Asked by: hobie
It will bolt up to your firewall using the included bracket.
Answered by: CJ Pony Parts
Date published: 2015-01-29

Is this booster compatible with 68 Cougar applications? What are the dimensions? I'm trying to fit a wilwood master cylinder.

Asked by: AC68

Hello my name is Paul 555, I have a 67 Mustang with V8, auto trans and 4 wheel drum brakes. I would like to add a power brake booster to the car. I have noticed that not all boosters are suitable for drum brake systems, how about this one?

Asked by: Shamp 65

Can you bolt up up Wilwood duel bowl master cylinder to this booster on my 68 coupe?

Asked by: BobE
  • 2016-09-29T08:24CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_BOOSTER1, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 183.83ms
  • QUESTIONS, PRODUCT

You Might Also Like

Product Video

Master Power Brake Booster Bendix Type 1967-1969 Video Transcript
By Bill Tumas: We’re here with a power brake booster for your 1967 through 1969 Mustang. This is a bendix-style replacement power brake booster for your 1967 through 1969 Mustang. It includes the mounting bracket, the firewall gasket, as well as the push rod already installed, making it ready to go. This brake booster is the perfect part to replace your factory booster and can also be used for converting the power brakes.