Radiator Support Panel with Crossmember Attached, for 1964-1966 Ford Mustangs.
We’re here with a replacement radiator support for your 64-66 Mustang Coupe, Convertible or Fastback. This radiator support comes with a cross member already installed, making for a much easier installation. All of your holes are already predrilled as well; including a radiator, hood latch, hood latch support, horns, stone guard, as well as a voltage regulator. It also includes these tabs preinstalled ready to mount your hood bumpers. Here we have a radiator support installed on a 1965 Mustang Coupe, because the cross member is already weld to the support, we can simply weld the cross member to your front frame rail and then weld the top of the support to your aprons. We’ve already installed our hood latch and release, and one of our bumpers as well. The radiator support is important not only because it provides a mounting location for your radiator, but also ties in your front aprons, as well as your front frame rails at the same time providing mounting locations for several other key components to your front end. You want to make sure you choose a good quality radiator support for your restoration.