Stop wasting your time trying to repair that old, rusted-out radiator support! Instead, upgrade to this CJ Classics radiator support 3640EWT with an attached crossmember, constructed of high-quality stamped steel with a weld-thru primer finish.
This radiator support bridges the gap between the inner front fenders, stiffening the front of your Mustang while providing attachment points for the radiator, hood latch hardware and horn. The attached crossmember connects the front frame rails under the radiator support, further stiffening the front end.
Reap the many benefits of the weld-thru primer finish on this radiator support. Not only does it reduce splatter, but it also reduces prep time when welding new parts to new parts that are both covered in the weld thru primer. It also prevents resin build up between welds that can trap moisture in the old porous steel, resulting in failure at the weld borders. Lower resistance at the weld surface also allows better penetration into the denser, new steel that helps forgive an old alloy's problems with porosity and impurities.
Features and Benefits:
- Reduced Prep Time and Splatter
- Lower Distortion of the Panels
- Superior Conductive Properties Minimize High Heat Zone Problems
- Eliminates Corrosion Between Overlapped Panels or Multi-Layered Spot Welds
- Provides Attachment Points for Radiator, Hardware and Horn
- Stiffens the Front End of Your Mustang
Tech Tip: We highly recommend buying this radiator support with an attached crossmember if you also need to replace the front crossmember at some point.