Pair of LED Reverse Light Bulbs for 2015-2016 F-150s.
Continue to improve the exterior lighting on your 2015-2016 F-150 by ordering this all-new Pair of LED Reverse Light Bulbs. Now available at CJ Pony Parts, these LED lights will illuminate a much brighter white hue to increase its overall light projection, especially at night.
Features & Benefits:
- HP11 LED Bulb Design
- 310 Lumens
- Pair for Driver & Passenger Side
- Illuminates Crisp, Cool White Hue
- Increased Brightness
- Housed in Machined Aluminum Casing
- Easy Installation
These bulbs come as a pair to update the driver and passenger side of your F-150. Each bulb has an HP11 LED design that will illuminate a crisp and cool white hue for the maximum amount of light output. The HP11 design features four side-firing 1.5W LED chips and a 5W LED chip on top. These are then projected out by a lens to produce an increase in overall brightness. This reverse light features 310 Lumens which means the more lumens in the reverse bulb, the brighter the light output. These bulbs are also housed within a machined aluminum casing that will provide strong heat diffusion for more durability. Easily mounted into place, you can't pass up on adding these bulbs to your truck.
With several great options on the market today, CJ Pony Parts stands behind the premium selection of top-notch LEDs available. We offer you just about anything from headlight bulbs to turn signal and marker lights. With the choices that CJ Pony Parts brings to you, you'll have the ability to go from mild to wild and get the most out of your easy to install LED bulb purchase.
Go ahead and order this Pair of LED Reverse Light Bulbs for your 2015 or 2016 F-150 from CJ Pony Parts today!
Product ReviewsWrite a review
will these fit a 2004 sport trac
You Might Also Like
CJ's Low Price:$108.00
CJ's Low Price:$18.00
CJ's Low Price:$10.80
These are a direct plug and play bulb and today we're going to be installing them on our 2016 F-150. Now, in order to install our new LED reverse lights you have to remove the tail light. Which, is secured in by two 8mm bolts. Now that we have the bolts out that secures the tail light it's still held in by a couple clips. You need to grab on to the tail light and pull it towards the back of the truck to pop it out. It is very tight, so it will take some force to get this off.
Now you don't have to do this part, but for the sake of the video we're going to completely disconnect the tail light from the vehicle by taking out both lights. Now, we can install our new LED reverse light. It's as simple as pulling out the old bulb and putting the new one in. Now, when you go to test this, if the light does not turn on all you have to do is flip it around and then it should work. Now we're going to test and see if it works.
It works, so now we can put this back in the housing and reinstall the tail light. Now we can reinstall our bulbs. The brown plug goes up top and the green, which is the reverse light, goes on bottom. Now, when you go to reinstall this tail light you need to line up everything just right so it will push back into place. Now, once you get everything lined up, push it in and reinstall your bolts.
Now, repeat the process on the other side and your installation's finished. Now you can see a comparison of our new LED reverse light compared to the old incandescent bulb. We have the LED on the left, the incandescent is on the right. The LED is much brighter and it gives off more of a white light rather than a yellow.
All right, so our LED reverse lights are in. They look great, they're way better than the factory bulbs. All you'll need to do this is an 8mm socket or a wrench. Installation should take maybe 15 minutes and before you know it you'll be heading down the road.