Scott Drake Driver Side Armrest Pad for 1987-1993 Mustangs with Power Windows.Replace your faded or worn out armrest pad with this quality reproduction. Features high quality urethane made in the USA. The armrest pad fits cars with power windows.
Available in five factory colors. Can be painted to match any interior color.
*Hardware sold separately.
Product ReviewsWrite a review
You Might Also Like
Regular Price: $41.99
Special Price: $35.96
You can see our original armrest is warped in the middle here. It's also badly faded and doesn't match our door panel any longer. The first step in removing it is to pull these two plastic plugs off. Use a small pick to just go around the edge here, underneath it, and pop them out. We'll now remove the two bolts behind those covers. Now we're going to remove the two Phillips head screws, one on the back, then one on the front. Now we're going to lift it upward. We're going to pull out to release the clips.
Once we're have the armrest off the door we can remove these four screws that hold the pad to the armrest. And we're going to remove our original armrest. You want to make sure you leave this original piece of trim in place; you're going to need it for your new armrest. There's alignment pins here. We're going to match them to the holes in the armrest pad. Press it down and turn it over and screw it back in. Once we have the pads screwed to the armrest, we're going to reinstall the armrest. And our installation's complete.
That's a huge improvement over our faded and warped original pad. Installation should take you no more than about 15 to 20 minutes. You'll be back on the road in no time.