Scott Drake Passenger Side Convex Glass Mirror for 1965-1966 Mustangs.An outstanding reproduction by Scott Drake. Features flawless chrome and perfect fit. Added convex mirror for better viewing on the right side. Works well on the left side too. Includes mounting screws and gasket.
|Fits 1965-1966 Mercury Montereys|
|Fits 1966 Ford Fairlane|
|Fits 1966 Ford Falcon|
|Fits 1966 Ford Galaxie|
|Fits 1966 Ford Thunderbird|
Similar Mustang PartsMore Exterior Mirrors
Product ReviewsWrite a review
Hi, Is the convex door mirror c3RZ17696-C the same show quality as C3RZ17696-R? I guess so given the same part number but want to make sure they are a matching pair in all respects, save for the convex glass. Thanks Simon
You Might Also Like
Regular Price: $72.99
Special Price: $58.39
Regular Price: $111.99
Special Price: $95.19
Regular Price: $93.99
Special Price: $75.19
Regular Price: $52.99
Special Price: $47.69
For this installation you'll need a Philips Head screwdriver, marker, 1/8'' drill bit, drill, and safety glasses. The mirror's simple to remove, just hold on to these two Phillips Head screws, and give the area a quick cleaning. Our Scott Drake mirrors are going to come with new standard- size screws, as well as new gaskets for installation. In our case our holes look pretty good, and the original screws came out pretty cleanly, so we're assuming they're going to be okay. If your holes are slightly enlarged over time, we do offer a larger screw, which will fit better.
Our new Show Quality mirror from Scott Drake is triple chrome-plated, and also has a crack-style glass as well. It's going to fit right in the stock location. You've got to make sure the flat part of the gasket actually goes against the mirror. The side with this edging's going to go on the body. And we're ready to move on to the passenger side.
Since our Weekend Wrench didn't come with a passenger-side mirror, we'll have to drill holes to mount it. Thankfully, the Scott Drake instructions have this template right on the back, to show us where to drill. We're going to lay the template in place up against the notch cutout here. Follow the curve and just make a small mark. Now you want to place the mirror over the two marks you just made, and check to make sure the vent window clears properly, which it does.
And we're ready to drill. Now you want to grab the drill and some safety glasses. Now we're going to install the gasket on the mirror. Again, flat side towards the mirror, and line it up with our new holes. Our installation's finished. Our new Scott Drake mirror does not only look great, it will make it a lot easier when we're backing up our project car. Installation should only take you around 15 minutes to do both sides, so you'll be back on the road in no time.