Scott Drake Quarter Panel Ornament Pair 1965

Scott Drake: C5ZZ-65290A76/7

Regular Price: $33.95

Special Price: $32.25

1490659200 28286
Need more quarter panel ornament nuts? Add this set to your order now!
CJ's Low Price:
Earn 32 RPM Points What's this?
1490054400 1490918400
On Sale: Up to 30% Off Sale!
Scott Drake Quarter Panel Ornament Pair 1965
Scott Drake Quarter Panel Ornament Pair 1965 Play Scott Drake Quarter Panel Ornament Pair 1965 Video 1 Play Scott Drake Quarter Panel Ornament Pair 1965 Video 2
Scott Drake

Product Description

Pair of Scott Drake Quarter Panel Ornaments for all 1965 Mustangs.

Having shiny, new, chrome-plated accents on your classic, 1965 Mustang makes a world of a difference. Replacing the chrome exterior trim on your car can have a rejuvenating effect, refreshing the whole look of your ‘Stang for a small price. CJ Pony Parts carries a high-quality reproduction Pair of Scott Drake C5ZZ-65290A76/7 Quarter Panel Ornaments for all 1965 Mustangs. Order your own set today and make your beloved pony car shine again.

Set Includes:
- (1) Driver side quarter panel ornament
- (1) Passenger side quarter panel ornament
- All necessary mounting hardware

Features and Benefits:
- High-quality Scott Drake reproduction
- Factory-correct design with proper fit and appearance
- Chrome-plated finish
- Attaches to the front of the quarter panel on both sides
- Sold as a pair for the driver and passenger side
- Fits all 1965 Mustangs
- Direct-fit replacements, easy installation

This high-quality Scott Drake reproduction pair, made using the factory-correct design with the proper fit and appearance, includes (1) driver side quarter panel ornament, (1) passenger side quarter panel ornament and all necessary mounting hardware. The ornaments have a chrome-plated finish and attach to the front of the quarter panels on both sides of your Mustang. These direct-fit replacements easily install onto any 1965 Mustang. Simply remove your old, stock ornaments and replace them with these Scott Drake reproductions.

Scott Drake has become an iconic brand that redefines quality for reproduction and aftermarket Mustang parts for 1965 to present Mustangs, and has become the standard for OEM quality Mustang parts that offer the best fit, durability and quality. Every part is designed to look and function exactly like the original, right down to the tiny details that the manufacturers of standard reproductions tend to ignore. CJ Pony Parts is proud to offer a huge selection of restoration-quality parts from Scott Drake for your classic beauty. Browse around and pick something up for your Mustang today!

Order a Pair of Scott Drake C5ZZ-65290A76/7 Quarter Panel Ornaments for your 1965 Mustang from CJ Pony Parts today!

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Scott Drake Quarter Panel Ornament Pair 1965 is rated 4.8 out of 5 by 4.
Rated 5 out of 5 by from quality part. heavy and excellent chrome plating. For the price and what you get is awesome. Will be doing a lot of business with cj pony parts.
Date published: 2016-03-23
Rated 4 out of 5 by from Great quality Just under showroom type quality, only time will tell if they stay good.
Date published: 2016-04-08
Rated 5 out of 5 by from Quality product!!! Looks great and fits great!!! Looks better than original!!!
Date published: 2016-09-03
Rated 5 out of 5 by from great help Parts were here in a couple of days. That was a big help.
Date published: 2015-05-10
  • y_2017, m_3, d_27, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_QO65C, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 7.2ms

Product Questions

How do these attach to the car? What is the overall height & width? thx

Asked by: wmsvid
Please watch our new video that is linked above.
Answered by: CJPP Dave
Date published: 2016-10-11

will these fit a 66 mustang

Asked by: sfjkjk
No, these will NOT fit a '66 Mustang. They are designed to only be used with a 1964.5 or 1965.
Answered by: CJPP Dave
Date published: 2015-10-28

Your Scott Drake part # C5ZZ-65290A76/7. Please confirm that this part will fit a 1964.5 Mustang. Thank You.

Asked by: Anonymous
  • y_2017, m_3, d_26, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_QO65C, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 21.22ms

You Might Also Like

Product Video

Scott Drake Quarter Panel Ornament Pair 1965 Video Transcript
By Bill Tumas: If you've been following along with our 1965 Mustang Coupe build, you know our goal with this car is to build something nice to drive, but looks good at the same time. The car is very original, we don't want to go crazy with the modifications. In the case of our car, the paint's in pretty good shape but a lot of the moldings and trim have definitely seen better days, and have some pitting going on. We want to do some external upgrades to our car next, and were going to start today, by installing a set of new quarter ornaments from Scott Drake. The quarter ornament replacement is something a lot of reviewers have asked about in the past, as it's not the easiest installation and there's a little bit more involved than you would think it is. Our ornaments look like a typical 50-year old set. Some pitting, some damage, not overly terrible, but a nice fresh set should give the car a really nice look.

The Scott Drake kit provides everything needed for your 1965 Mustang, including new studs, new seals, the retaining nuts, and of course, the high-quality chrome ornaments themselves. For this installation, you're going to need a 3/8" ratchet, 3/8" socket, short extension, Phillips head screwdriver, a T10 Torx bit, and a small 3/8" wrench.

The installation is going to begin actually inside of the car. To get to the hardware on the inside we have to remove the bottom seat, the seat back, and then the quarter trim panels themselves, to be able to access the nuts on the back. Back seat, just lift up and pull out. Now, to remove the seat back, there's going to be a bolt on each side. When you take apart a car like this, a low- mileage car, sometimes you find some pretty cool stuff. Here's the original shipment tag dated December 11, 1964, from the back seat of the car. To get the quarter trim panel off, we're going to start by removing our door seal plate. There's going to be nine screws that hold this on. There's four across the top, and then five on the inside edge here. For the inside edge, you might need either a right-angle, or a small screwdriver. The other ones are very easy to get to with a normal Phillips head.

Now we can start on quarter trim panel removal. Start by removing the window crank. There's a little set screw Alan key on the top here, so we'll loosen that up to remove the crank. With the crank out of the way, grab ahold of the windlace, just pull that right off like that. Now we can work on the five screws. One here, two, three, four, then one up top. If your car still happens to have the paper back here, we're going to carefully now peel this off. This is going to be tight quarters. It is kind of tough to see. The good thing is the nuts on the quarter ornaments are usually only hand tight, so you should need any kind of crazy ratchets or wrenches to get them off. Usually just holding the socket in your hand will do the trick.

You can see here, right here is the bottom one. The second one is right behind the window thing, just basically right behind the window track here. The third one is up high here, which you can actually get it from the top as well. In the original setup, more than likely the middle one won't have a nut. All you've got to do is release the bottom one and the top one. Again, you should be able to do it by hand, just make sure you hold on to the quarter ornament. Now we're going to reach up here for the top one. Again, you can get it from that top opening as well, whichever one you're more comfortable with. Once the retaining nuts are off, carefully remove the quarter ornament.

Now grab our new Scott Drake ornament. They are side specific. If you look on the back, they are labeled left-hand and right-hand. Start by threading in the studs. Put our seals just in place on top of them for now, and they're ready to go on the car. I'm going to give the area just a quick clean here before we install the new one. Carefully put the ornament in place. Then we're going to thread on our new nuts on to the studs to hold it in place. Start with the top one, then the bottom one. Scott Drake provides the hardware, so we're going to put the middle one on as well. It's kind of hidden behind this, a little bit harder to get to, but you'll see it. Like I said, hand tight should suffice, but I'm going to use my small wrench in here and give them just an extra little quarter crank just for security.

Now we're going to reinstall our quarter trim panel. The first step in the process is going to be reinstall our paper. With the quarter trim panel mounted, now I can reinstall the windlace. Then reinstall the washer and window crank. With our quarter trim panel reinstalled, now we can reinstall our door seal plate. Okay, now you want to repeat the process on the other side, reinstall the rear seat, and your installation's finished.

The new Scott Drake quarter ornaments add a nice fresh look to the side of our 1965 Mustang. The installation's not too bad. It's a little time consuming, the working area is a little on the tight side, but overall, it shouldn't take you any more than two hours. You'll be back on the road in no time.