Sub Frame Connector Bolt-On Pair Coupe/Fastback 1965-1970

CJ's Part Number: SFC1
CJ's Low Price:
$120.99
1469318400 30200
Earn 120 RPM Points What's this?
Sub Frame Connector Bolt-On Pair Coupe/Fastback 1965-1970
Sub Frame Connector Bolt-On Pair Coupe/Fastback 1965-1970 Play Sub Frame Connector Bolt-On Pair Coupe/Fastback 1965-1970 Video 1

Product Description

Pair of Bolt-On Style Sub Frame Connectors for 1965-1970 Mustang Coupes and Fastbacks.

These sub frame connectors strengthen your chassis for extra traction and improved handling. Designed for a bolt-on installation, but can be welded on for better results and additional strength.

Similar Mustang Parts

similar Mustang parts More Restomod Chassis Stiffening  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Sub Frame Connector Bolt-On Pair Coupe/Fastback 1965-1970 is rated 3.7 out of 5 by 10.
Rated 5 out of 5 by from Bolt on performance boost for classic Mustangs!!! I installed this subframe connector to my 1968 Mustang about 4 months ago and it has been working fantastically. This has fixed my flexing unibody and has enabled my suspension to fully function. I'm just waiting for some warmer weather and then I'm going to weld this in-place to ensure it is a permanent fix. Great product, easy install. I just happened to be changing out my rear leaf springs also, so this was all done at once. To anyone wanting their classic Mustang to have a great personality change, this subframe connector does the trick!
Date published: 2015-01-12
Rated 3 out of 5 by from It's ok So I finally got around to installing this subframeconnector on my 69 fastback. What a PITA it was. The 3/8 bolts you bolt underneath the rear frame doesn't line. You will mostly like have drill some bigger holes to make sure it lines up. The pictures shows 4 screw that suppose to get bolted to the front of the frame u only get 2. I just bought some grade nut and bolt the same size and used it. I will weld it in place later. I already have primed with weld thru primer
Date published: 2016-04-01
Rated 5 out of 5 by from Good fit, great look, and helped quite a bit These subframe connectors really are of good quality. They took me about an hour and a half to install and fit very well with no modifications (you may have to modify the back of the front rails). The body feels stiffer and overall the car feels sturdier (got rid of a bunch of squeaks, rattles, creaks, etc). The handling benefit was there as well, couldn't really tell the body was flexing much anymore. Overall good product that Mustang guys should have.
Date published: 2015-01-08
Rated 5 out of 5 by from Good affordable product! They were not difficult to install but not easy either a little twisting wedging and drilling but all lined up well and the frame is more stable and less flexible under hard launches and exceleration altogether well worth it fit great on 1969 Mach 1 Mustang!
Date published: 2015-11-07
Rated 5 out of 5 by from What a great deal! Purchased these frame ties and am really impressed ! Strong ,well made and after mocking them up they fit perfect. Will be welding these in for added support. After looking around at other manufactures and their prices these were a steal.
Date published: 2016-02-27
Rated 4 out of 5 by from Good but happy with it Bought these to help stop any body flex when I put my Cal Trax traction bars on. They bolted on with just a bit of modifications don't know if it was from their quality controls or the fact I was putting them on a 44 year old unibody. Would bet on the latter. I would recommend them it stiffned the car and change the ride for the better.
Date published: 2015-08-31
Rated 1 out of 5 by from terrible product I bought these thinking they would be a easy install, because the description says that they're a simple bolt on. Turns out they didn't fit at all. They didn't fit, the instructions are horrible, and I had to cut & hammer them to try to get them to fit! I'd like a refund or cj to send me a pair that fits.
Date published: 2016-03-27
Rated 4 out of 5 by from Decent Product I bought thee connectors and realized later that my 1965 mustang didn't have the threaded bolt holes in the rear frame rails. I just welded them and they seem to stiffen the suspension quite a bit.
Date published: 2016-06-06
  • 2016-07-24T07:26CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_SFC1, PRD, sort_relevancy
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 100.52ms
  • REVIEWS, PRODUCT

Product Questions

Will these sub frame connectors work with Cal-Trac traction bars?

Asked by: jasonsfords
Not with out modification.
Answered by: rk cjpp
Date published: 2016-03-28

when will these be in stock...or do i need to go some where else

Asked by: wild hourse
We are expecting them any day now.
Answered by: rk cjpp
Date published: 2016-01-29

I have tire rub, clearance looks good. will these frame connectors help?

Asked by: r66pony
Unless you are getting serious chassis flex probably not.
Answered by: rk cjpp
Date published: 2015-12-24

Will they fit a 67 Mustang with Traction Masters that are welded to the rear sub frame?

Asked by: c7zzgt
It is possible with some modification.
Answered by: rk cjpp
Date published: 2015-12-22

WILL THESE FIT ON A 1967 Mercury Cougar like some of your other subframe connectors?

Asked by: 67Cougarman
The vendor did not provide any cross fitment information but since they are built on the same platform I could only guess that they would fit.
Answered by: rk cjpp
Date published: 2015-11-20

could this also be welded on ?? if so would that make it fit better or not?

Asked by: luis9995
The description specifically says they can be welded on.  So I'm confused... Besides anything can be welded if you want it to be enough.
Answered by: 67Cougarman
Date published: 2015-11-20

Could you please elaborate on the differences between this bolt on set and the 01 weld on, other than the obvious. i.e. tube size and thickness? Coated? Other?

Asked by: Richard2940
Without knowing exactly what part number you want to compare this to, it's hard to say the difference. Typically, manufacturers will create a bolt-on and a weld-on subframe connector and they will for the most part be identical other then the obvious.
Answered by: CJPP Dave
Date published: 2015-10-15

My 66 mustang coupe doesn't seem to have the threaded holes for the 3/8 bolts on the rear end of the frame connectors. Any suggestions? 

Asked by: Trusse6
If you can't make the holes, you might need to resort to welding.
Answered by: CJ Pony Parts
Date published: 2015-09-10
  • 2016-07-24T07:38CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_SFC1, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 95.97ms
  • QUESTIONS, PRODUCT

You Might Also Like