ACC Carpets Essex Carpet Molded Black Mustang 1964-1/2

Add a plush, luxurious feel to your Mustang's interior with ACC's Black Molded Essex Floor Carpet! This Essex-style carpet is a super-plush upgrade over the original 80/20 loop carpet found in 1964-1/2 Mustangs, and ACC's standard cut pile. The Essex carpet is made using 100 percent nylon cut pile and is manufactured with over 40% more nylon fibers than the average aftermarket cut pile carpet. ACC's standard cut pile carpet is a 1/4 inch high, whereas Essex carpet is roughly 3/8 inch high, creating a deep, plush feel.

Features and Benefits:
- Modernized appearance with plush feeling
- Available for Coupe or Convertible models
- Available with or without mass backing
- Heat-molded 2-piece construction
- 14 oz. of 100% DuPont yarn per square yard
- Black dyed finish is tested against humidity and fading
- 36 oz. jute padding underside provides insulation
- Made in the USA!

This Essex-style Floor Carpet is precision heat-molded in two separate pieces for a perfect fit and easy installation. It comes equipped with an original style, color-matching front heel pad on the driver side. The Essex carpet is dyed black using the finest dyes available and tested for ozone humidity fading and light fastness. The underside of the carpet features heavy 36-ounce jute padding for insulation. Plus, you can decide whether you want to add mass backing, which adds a durable layer of rubber to the backing for increased rigidity and decreased road noise. Its 40mil thick design eliminates the need for sound deadeners while also remaining molded to its shape.

*Essex carpet is only available in black.
*What makes this carpet different from 1965 Mustang carpet is where the carpet meets the door sill plates. On 1965 Mustangs the carpet runs all the way up on the rockers, whereas on 1964-1/2 Mustangs it does not. The 1965 Mustang also had an additional toe pad extending off of the heel pad, while 1964-1/2 carpet does not have this.

Please Note: ACC's carpets do not come with pre-cut holes, allowing you to make the necessary cuts only where needed for various interior components.

Tech Tip: When you first take your new carpet out of the box, you may notice quite a few wrinkles. This is normal. We recommend laying the carpet out in the sun for a few hours to help soften the jute backing and to help reduce the amount of wrinkles that are visible prior to installation.

Vehicle Fitment:
- 1964-1/2 Mustang