Steering Wheel Black Leather/Carbon Fiber W/Red Stitching/Stripe Mustang 2015-17

Are you looking for a more comfortable steering wheel while on the track for better control and handling? Or do you just want to infuse your 15-17 S550 with the love of racing and high-power engineering? This ACCELATEC Black Leather and Carbon Fiber Steering Wheel is race-inspired and fits 2015-2017 Mustangs. Allowing you to upgrade and customize your Mustang’s interior quickly and easily.

Features and Benefits:
- Carbon Fiber Construction
- Black Leather on Either Side and at 6 o'clock
- Red Sighting Stripe at 12 o'clock Position
- High-Gloss Finish on Carbon Fiber
- Red Stitching Throughout the Entire Steering Wheel
- Slightly Thicker Diameter Compared to Stock
- More Defined “10 and 2” Grips
- Flat Bottom Race-Inspired Design
- Design Inspired by the Steering Wheel in Shelby GT350 and GT350R
- Reuses ALL Original Hardware and Wiring from Existing Steering Wheel
- Requires use of your Factory Airbag and Steering Wheel Controls
- Will also fit Right Hand Drive (RHD) Models
- Direct-fit for ALL 2015-2017 Mustangs with a Manual Transmission

This steering wheel is designed both around the steering wheels found in race-cars and in the Shelby GT350 and GT350R to give you the best, most dynamic look possible. For a comfortable hold, the wheel’s diameter is slightly thicker than your factory wheel and the “10 and 2” positions are more defined.

The construction of this steering wheel is high-quality leather and carbon fiber. Red stitching runs throughout along with the a 12 o’clock sighting stripe accented in red within the carbon fiber area at the top of the steering wheel.

Please Note:
- Does NOT include steering wheel controls, hardware or an airbag.
- Professional installation is recommended.

*This will also fit 2015-2017 Automatic Transmission Mustangs equipped with paddle shifters. But it will require you to swap the trim panel, wiring harness and shifting mechanisms from your existing steering wheel to the new steering wheel. Without swapping over the original components the paddle shifters won’t work.

Tech Tip: The steering wheel shown in our installation video was an early prototype and part of a small initial run that is no longer in production. Our video will remain active on this part because it is still an accurate representation of the installation process. The steering wheel customers will receive is shown in our product images and described within this product description.