ACCELATEC Taillight Panel Molding Gloss Black Smooth Without Emblem 2015-2020

ACCELATEC:
TPM43
Rating:
99% of 100

Highlights

  • Smooth ABS Construction
  • Quick And Easy Installation
  • High-Gloss Piano Black Finish
  • Exclusive To CJ Pony Parts
MSRP $199.00
$134.99
You save 32%

ACCELATEC Gloss Black Smooth Taillight Panel Molding without Emblem for 2015, 2016, 2017, 2018, 2019 and 2020 Mustangs.

If you're looking to streamline the exterior of your newer 2015-2020 Mustang, than this ACCELATEC Gloss Black Smooth Taillight Panel Molding (TPM43) absolutely needs to be on your project list! Don't wait and order your new exterior component from CJ Pony Parts today!

Taillight Panel Molding Features:
- Designed to fit all 2015-2020 Mustangs
- Constructed using ABS plastic injection molds
- Designed using CAD data for an exact, precise fit
- Features high-quality UV paint matched to the original factory high-gloss Piano Black color
- Utilized integrated insert frame to permanently bond like OE components
- Features a smooth styling without any holes for emblems
- Simple and fast plug-and-play install with included custom hardware
- Offers your pony a subtle, OEM-style look but upgraded feel
- Manufactured exclusively for CJ Pony Parts

ACCELATEC engineered this all-new taillight panel exclusively for CJ's, meaning you won't see it around any other website and only CJ's customers will have access to it! You'll get this all-new, direct-fit upgraded taillight panel to help make your late-model Mustang's exterior sleeker and sportier than ever, all without having to drill a single hole. You'll love the way this all-new panel helps to streamline your pony's rear, giving it a high-end look and feel without spending hours working on the body or paint. You'll get all premium-quality hardware exclusive to his taillight panel piece, so install will be a breeze.The glossy black finish will add a subtle touch to the exterior without being too flashy, plus since it features OEM Piano Black paint it'll match other stock pieces on your ride. Hurry up and place your order now with CJ's!

*This taillight panel will fit all 2015-2020 Mustangs.

Forged with driver solutions in mind, ACCELATEC parts and accessories are built to give your performance vehicle more. More power, more efficiency, more character. ACCELATEC products will leave you with a confidence in your car and the satisfaction of knowing that you chose the best, so place your order now with CJ’s!

Be sure to purchase this high-quality ACCELATEC TPM43 Gloss Black Smooth Taillight Panel Molding without Emblem for your 2015, 2016, 2017, 2018, 2019 or 2020 Mustang now from CJ Pony Parts!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

Well, there are plenty of ways to dress up a taillight panel on a late model Mustang, like this GT emblem we installed here that lights up. A lot of people still love the look of a smooth panel. Now Ford Performance offers one, and a lot of people love that for the '18 or '19 Mustang, but it still has this groove in it. The original one for '15 through '17 was smooth but as long as it's discontinued, now thanks to ACCELATEC that style's available for 2015 through 2019.

This taillight panel from ACCELATEC is going to be a direct replacement for your factory panel on all 2015 through 2017 Mustangs, and that's a complete replacement assembly. So you simply remove your factory panel, transfer over some hardware, and you can install this in its place. It has the smooth finish found in the early '15 through '17 Mustang without the indentations. Gives your car a nice smooth look. Again, this is available as a complete replacement panel and will fit all 2015 through 2019 Mustangs.

This panel has the correct piano black finish to match the OE. And one of the issues with the original '15 through '17 smooth panel was the dimples in the middle that actually start showing through because it still had the original embossment in the back for the emblems. So this is made to be a delete panel. That will not be an issue with the ACCELATEC piece.

For this installation, you'll need a quarter inch ratchet, 5.5 millimeter socket, 7 millimeter socket, an extension, plastic pry bar, small flat head screwdriver, and a soft blow hammer.

You begin the installation by popping the trunk. You can grab these two rubber stoppers. Just turn them counter clockwise to remove them. And then carefully just pop this off. Okay, and to get the rest of the panel off, just remove all these little plastic pushpins.

All right, with the panel off, you want to disconnect your camera. Let's pop this off right here. This wire here, don't worry about this. We had an aftermarket emblem that lit up on our trunk, so we've extra wiring back here, but you won't have this on your factory one. Pop these off on both sides. You want to remove the screws in here.

The next part we're going to do a little prying. I can put a little body shop tape of some sort, just kind of put it along the edge here. Just so you don't damage your paint. Just get a little plastic pry bar usually works best. Just get in here and pop out the clips.

And then remove the factory taillight panel. All right. Both panels on the table with the transfer over the backup camera. These four clips here and there's four inserts. We'll start with the camera.

Put it right into our new panel from ACCELATEC. Reinstall the original hardware. I recommend moving over immediately because it is possible to install the camera upside down as I found out in the past. And it will plug right in and work normally, except when you go to back up, everything is upside down.

You can get these out, shimmy them off with a screwdriver. And these tabs here on the back, I'm just going to carefully pry these off as well. And then put the original panel aside. Make sure these little spikes here are still down. Install the new panel. When installing these, make sure these little retainer tabs are popped out. It may have moved a little bit when you took them off the original. You've got to line it up and sort of press it in. Now, sometimes when you pull off the original panel, this will actually come out a little bit.

The metal is very, very thin here, and the new one then won't sit flush with this top. So grab a hammer or anything, a small plastic pry bar. And just hammer them back flat. Now when you install this, you've got these two little channels down here. They go under the plastic here. Make sure they're underneath that before these clips go in the top, or the bottom will stay loose.

You almost want to line it up underneath and just slide it upward.

All right, now we're going to reinstall the original hardware.

Okay, and you reconnect the camera. Don't forget to do that. And reinstall the trim panel.

Install the covers for the bolts.

Cover for the latch.

And reinstall the bump stops.

And your installation is finished.

Now the one thing, if you own one of these cars you know about is these taillight panels, the second you even breathe on it, it gets fingerprints. Ours did too. I'm just using a dry rag here that will clean them off. You can see the material, the ACCELATEC panel, cleans up really, really nicely. It's not scratching. There's no surface scratches or anything. I'm using nothing crazy cleaner wise, a good quality microfiber, to get all my fingerprints off.

My opinion is smooth deleted emblem is still the best looking trunk panel on these cars. Now you can see the ACCELATEC panel fits nicely. We have a nice gap at the bottom here, so it's not damaging the paint when you close it. Yet it's nice and tight on the trunk lid up here. Installation's pretty straightforward. This is maybe an hour, hour and a half. You'll be back on the road in no time.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.