aFe Intercooler Charge Pipe BladeRunner EcoBoost 3.5L F-150 2011-2014



  • 3" To 3-1/2" CNC Mandrel Bent
  • Black Powder Coated
  • Add 10 HP And 12 Ft-Lbs
  • Necessary Hardware Included
MSRP $456.25
You save 20%

aFe BladeRunner Intercooler Charge Pipe for all 2011, 2012, 2013 and 2014 F150s with a 3.5L EcoBoost Engine.

aFe's BladeRunner Intercooler Charge Pipe is designed to replace the restrictive factory tubing that runs from the intercooler to the throttle body on all 2011-2014 3.5L EcoBoost F150s. The Charge Pipe is a 3" to 3-1/2" CNC mandrel bent, black powder coated, smooth aluminum tube that dramatically increases air flow, while adding 10 horsepower and 12 ft-lbs of torque to the rear wheels!

The BladeRunner Intercooler Charge Pipe from aFe lines up directly to the factory intercooler and comes with durable silicone couplers for a flawless fit and an OE quality seal. All necessary hardware is included for a simple and clean installation.

Ford's 3.5L EcoBoost engine in the 2011-2014 F150 is just begging for modifications to unleash its true potential. With an aFe BladeRunner Intercooler Charge Pipe, your F150 will feel more like a sports car than a truck!

*Only legal in California for racing vehicles which may never be used on public roads.

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters and intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. aFe's purpose was not just to be another vendor that offers air filters, they chose to pay attention to those finer details that set an aFe filter apart from the competition.

California Residents: Proposition 65 Warning

Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.

Installation Difficulty


Novice skill is required for this installation.

Installation Videos

Video Transcript

We’re here with the aFe power Bladerunner Charge Pipe, fitting your 2011 through 2014 3.5 liter EcoBoost. This aFe Bladerunner Charge Pipe's going to go between the inner core and throttle body on your 2011 through 2014 EcoBoost F150. It's going to replace the restrictive factory piping with this large three and a half inch aluminum pipe that cuts down to three inches up here. This pipe's going to be a direct replacement, and includes all necessary clamps and couplers for installation. aFe claims ten horsepower and 12 feet pound of torque with no additional modifications. This mandrel-bent aFe Bladerunner Charge Pipe makes an excellent upgrade for any 2011 through 2014 EcoBoost F150.

Vehicle Fitment

This product will fit the following F-150 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account