Airaid Cold Air Intake Kit MXP Series With Oiled Red Filter 5.0L F-150 2015-2020

Airaid:
AIR-400-293
Rating:
80% of 100

Highlights

  • Estimated Gains Of 19HP & 26Tq
  • Easy Bolt-On Installation
  • Washable And Reusable Filter
  • 50-State Legal
$449.99

Airaid MXP Series Cold Air Intake Kit with an Oiled Red Filter for 2015, 2016, 2017, 2018, 2019 and 2020 F-150s with a 5.0L Engine.

So you are looking to get a little boost in power out of your 2015-2020 F-150 5.0L and increase the overall performance? Then take a look at this Airaid MXP Series Cold Air Intake Kit with an Oiled Red Filter from CJ Pony Parts! The MXP Series from Airaid represents the pinnacle of their cold air induction systems, giving you higher horsepower and acceleration for a better overall performance feel. This intake is estimated to give your Coyote powered 2015-2020 F-150 a 19 horsepower gains at 3775 RPM!

Airaid MXP Series Cold Air Intake AIR-400-293 Features and Benefits:
- Estimated gains of 19hp and 26lbft of torque at 3775 RPM
- Replaces stock intake tubing, air filter and air box
- Easy, bolt on installation
- Premium oiled red air filter for superior airflow
- Air filter is washable and reusable
- Legal for sale and use in all 50 states (CARB EO# D-607-17)

The MXP Series cold air intake box is a one piece roto-molded air box design. This construction fixes a lot of the factory air box restrictive design flaws and allows more air flow through the intake box. An Airaid premium air filter is used inside the intake box for increased air flow and filtration through the filter than most aftermarket air filters. To maintain the proper mass air flow readings, a new air intake tube was constructed from cross linked, high-density polyethylene to direct the air flow to the engine.

This cold air intake design is an extremely sophisticated system that maintains proper air-to-fuel ratios while increasing the air flow, yet it is simple to install. The best part of the MXP Series air intake is that there is no need for computer re-calibration, just install the intake and you are ready to go!

*Not TUV approved for Europen models.
*Will NOT fit F-150 Raptors.

Order this Airaid (AIR-400-293) MXP Series Cold Air Intake Kit with an Oiled Red Filter for your 2015, 2016, 2017, 2018, 2019 or 2020 F-150 with a 5.0L Coyote Engine from CJ Pony Parts today!

California Residents: Proposition 65 Warning

This item is 50-state legal (CARB E.O. Number D-609-19)

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

We’re here with Airaid's MXP Series Cold Air Intake Kit fitting your 2015 through 2016 Five Liter F150. This Airaid MXP Series Intake is a great way to add some horsepower and torque to your 2015 through 2016 F150 when equipped with the Coyote engine. Starts off with this high flow reusable oiled filter, which mounts inside this box that will work with your factory inlet and keep temperatures down. The filter connects to a bellmouth which goes through this rotomolded intake tube up to your throttle body. Silicone couplers, all clamps, and all hardware for installation are included. You can see this extension here's going to bolt to the Airaid Air Box and go up to work with your factory inlet duct tubing. This Airaid MXP Series Cold Air Intake Kit's going to improve your throttle response, and also look great under the hood. Airaid claims gains of 19 horsepower and 26 ft-lb of torque, with no additional tuning required.

Vehicle Fitment

This product will fit the following F-150 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart