Anderson Composites Type-GT5 Hood Carbon Fiber Dual-Sided Mustang V6/ EcoBoost/ GT 2015-2017

Anderson Composites:


  • 19” X 26” Vented Area
  • High-Grade Marine Resin
  • Ideal for Off-Road Racing
  • Does NOT Fit GT350/GT350R
MSRP $1,899.00
You save 10%

Anderson Composites Dual-Sided Carbon Fiber Type-GT5 Hood for all 2015, 2016, and 2017 EcoBoost, V6, and GT Mustangs.

As the owner of a 2015-2017 Ford V6/EcoBoost/GT Mustang, you have likely been influenced by both ends of the Mustang community: showroom prestige and off-road racing capabilities. If you are possibly looking for something that can offer you superiority in both realms, be sure to consider this Anderson Composites Double-Sided Type-GT5 Hood (AC-HD15FDMU-GT5-DS) from CJ Pony Parts for a stylish upgrade!

Features and Benefits:
- Aggressive GT500-Inspired Design
- Large, 19” x 26” vented center-section for optimal heat extraction
- Ideal for High Performance Engines in Off-Highway/Racing Applications
- Hand-Crafted Premium Quality Wet Carbon Fiber Construction
- Lightweight but Strong with A High Gloss Show-Quality Finish
- Vacuum Infused Marine-Grade Resin with UV Inhibitors
- Made Using High-Quality 3K 2x2 Weave Carbon Fiber Fabric
- Carbon Fiber "Skeleton" Bonded to Underside of Hood helps Reduce Weight
- Direct Replacement, Will Install Using OEM Hood Hardware (NOT Included)
- Mesh Screen is Removable & Paintable
- Weighs approximately 24.9 lbs.

*It is highly recommended to use an automotive-grade clear coat with additional UV inhibitors to further prolong the life and finish of this hood.

Anderson Composites has added another great carbon fiber hood design for 2015-2017 V6, EcoBoost and GT Mustangs. This unique, double-sided Type-GT5 carbon fiber hood (AC-HD15FDMU-GT5-DS) not only looks good but features a large 19” X 26” vented area in the center section to improve heat extraction for high performance applications. The vent has a detachable screen and is paintable. The double-sided carbon fiber construction helps decrease weight, improve overall strength and durability, and is perfect for all types of off-road racing applications.

This Type-GT5 hood (AC-HD15FDMU-GT5-DS) is made of high quality 3k, 2x2 carbon fiber twill fabric and high-grade marine resin with UV inhibitors. The vacuum infusion method to make this hood provides the best fabric-to-resin ratio which results with the best fitment and finish. This hood mounts to the factory locations with the OE hardware for easier installation. These carbon fiber hoods have great show quality looks with a high-luster finish.

Please Note: Modifications may be necessary for correct fitment of the O.E. windshield washer spray nozzles and fluid lines as part of the normal installation process.

Tech Tip: Anderson Composites does not suggest re-installing gas shocks/dampers/struts and recommends the use of a hood prop rod. They also recommend the use of hood pins for safety reasons and strongly advise to install a heat shield on the underside of this hood.

Vehicle Fitment:
- 2015-2017 V6 Mustang
- 2015-2017 EcoBoost Mustang
- 2015-2017 GT Mustang

*Will NOT fit the GT350 or GT350R.
*Does NOT allow use of 2016 OE hood turn signals.
*NOT recommend to install this hood on models manufactured for sale outside of the US due to the factory integrated active hood safety feature that is built into the OE hood hinges on those Mustang models.

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.