ARP Cylinder Head Stud Kit 2000 Pro-Series 12-Point 4.0L SOHC V6 2005-2010

ARP:
253-3701
MSRP $663.87
$395.47
You save 40%

ARP 2000 Pro-Series 12-Point Cylinder Head Stud Kit for all 2005, 2006, 2007, 2008, 2009 and 2010 4.0L SOHC V6 Mustangs.

Whether you are rebuilding your 2005-2010 4.0L SOHC V6 Mustang engine or starting a build from scratch this ARP 253-3701 2000 Pro-Series 12-Point Cylinder Head Stud Kit will give you all the hardware you need to secure your cylinder heads. Made in the good ol’ US of A, this chrome moly Cylinder Head Stud Kit features a black oxide finish to give you some style to accent the strength and durability.

This kit ensures the hardware under your hood will last for years to come through several methods. Firstly, all the hardware is cold-forged to ensure molecular integrity. Secondly, heat-treating takes place prior to thread rolling and machining to further reinforce the durability of the hardware. The head style features a 12-point design to ease the tightening. Hardened parallel washers are included to achieve even load distribution and accurate torque readings. All in all, you’re getting the hardware you need and the quality you want to ensure a long life under the hood of your 4.0L SOHC V6 Pony.

Features and Benefits:
- Cold-forged to ensure molecular integrity
- Heat-treated
- 12-point nuts
- Hardened parallel washers
- Even load distribution
- Accurate torque readings
- Made in the USA
- Easy to install

Specifications:
- Fastener Style: Stud
- Undercut Stud: No
- Head Style: 12-point
- Fastener Material: ARP2000
- Fastener Finish: Black oxide
- Washers Included: Yes
- Fastener Yield Strength (psi): 200,000 psi

Tech Tip: ARP recommends using the ARP Ultra-Torque Fastener Assembly Lubricant as opposed to motor oil or other low quality lubricants. This is due to higher friction on the studs as well as inconsistencies in the clamping force of the fasteners when insufficient lubricants are used.

Please Note: While following the manufacturers recommended torque sequence, tighten the nuts to the ARP recommended torque specifications using ARP Ultra-Torque Fastener Assembly Lubricant.

Order this ARP 253-3701 2000 Pro-Series 12-Point Cylinder Head Stud Kit for your 2005, 2006, 2007, 2008, 2009 or 2010 4.0L SOHC V6 Mustang today from CJ Pony Parts.

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

We’re here with an ARP head stud kit, fitting your 2005-2010 four liter Mustang. If you're building the four liter V6 engine in your 2005-2010 Mustang, that takes serious horsepower this head stud kit's going to be a great idea. If you're running boost on this engine, over time the factory head bolts can actually start to stress and it can cause a head gasket leak. This head stud kit features cold forged bolts, that are much, much stronger than the factory bolts. With a 12 point head design, it'll be a direct replacement for the factory head bolts. This is a complete kit with everything necessary to install on your 2005-2010 Mustang and it's made right here in the USA.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
  1. ARP Thread Sealer 1.69oz
    ARP Thread Sealer 1.69oz
    $11.99
    Rating:
    100 %
Add to Cart