BluePrint Engines High Torque 496 CI Base Dressed Crate Engine Chevy C10/ C/K 60-98

BluePrint Engines:
BP49613CTC

Highlights

  • 451 Horsepower
  • 523 lb-ft of Torque
  • Forged Rotating Assembly
  • 87-Octane Compatible
$12,499.00
Earn
points.
Product Description

BluePrint Engines High Torque 496 CI Base Dressed Carbureted Crate Engine for 1960-1987 Chevy C10s and 1988-1998 Chevy C/K Trucks.

Put 523 lb-ft of torque to work in your 1960-1987 Chevy C10 or 1988-1998 Chevy C/K with this BluePrint Engines 496 CI high-torque crate engine. Producing 451 horsepower, this carbureted big block combines a hydraulic roller camshaft with an 8.7:1 compression ratio to provide strong low-end torque and responsive street performance while operating on 87-octane gasoline.

A forged steel crankshaft, forged pistons, and H-beam connecting rods provide a solid foundation for the rotating assembly, while aluminum cylinder heads support airflow and combustion efficiency. The base-dressed configuration includes a Holley 750 CFM carburetor, Weiand Stealth dual-plane intake manifold, distributor, and essential engine components for a practical big-block installation.

Features and Benefits:
- 496 CI displacement produces 451 horsepower and 523 lb-ft of torque
- 8.7:1 compression ratio supports operation on 87-octane gasoline
- High-strength cast iron block with 4-bolt main caps
- Standard-deck block with a 1-piece rear main seal
- 4.310" cylinder bore and 4.250" crankshaft stroke
- Mechanical fuel pump provision
- Forged steel crankshaft supports high-torque operation
- H-beam connecting rods with 150,000 PSI bolts
- Forged flat-top pistons with 3cc volume
- Internally balanced rotating assembly
- Aluminum cylinder heads with 119cc combustion chambers
- 315cc intake runners support airflow
- 2.30" intake valves and 1.88" exhaust valves
- Hydraulic roller camshaft supports low-RPM torque production
- Weiand Stealth dual-plane intake manifold
- Holley 750 CFM carburetor
- Base-dressed configuration includes essential engine accessories

Engine Specifications:
- Displacement: 496 CI
- Horsepower: 451 HP
- Torque: 523 lb-ft
- Compression ratio: 8.7:1
- Fuel requirement: 87 octane
- Block material: Cast iron
- Bore: 4.310"
- Stroke: 4.250"
- Connecting rod length: 6.385"
- Crankshaft: Forged steel
- Pistons: Forged flat-top, 3cc
- Rotating assembly: Internally balanced
- Cylinder heads: BluePrint aluminum PS8013
- Combustion chamber: 119cc
- Intake runner volume: 315cc
- Intake valve diameter: 2.30"
- Exhaust valve diameter: 1.88"
- Camshaft: Hydraulic roller
- Intake valve lift: 0.480"
- Exhaust valve lift: 0.483"
- Intake duration at 0.050": 204 degrees
- Exhaust duration at 0.050": 209 degrees
- Lobe separation angle: 115.5 degrees

Kit Includes:
- BluePrint Engines 496 CI base-dressed crate engine
- Weiand Stealth dual-plane intake manifold
- Holley 750 CFM carburetor
- Distributor
- Harmonic balancer
- Timing cover
- Oil pump
- Dipstick
- Oil pan

Vehicle Fitment:
- 1960-1987 Chevy C10
- 1988-1998 Chevy C/K

Please Note:
- Not intended for use in pollution-controlled vehicles.
- Verify header and exhaust clearance before installation.
- BluePrint Engines recommends electric cooling fans capable of at least 4,000 CFM for engines exceeding 400 CI.
- Set initial ignition advance to 13-16 degrees BTDC, with total advance not exceeding 34 degrees BTDC by approximately 4,000 RPM.
- Pre-lubricate the engine before initial startup according to the supplied installation instructions, even though the engine has been dyno-tested.
- Use only a distributor with a melonized iron or steel gear compatible with this engine.
- Bronze and unmelonized cast iron distributor gears can cause engine damage and affect warranty coverage.

California Residents: Proposition 65 Warning

Related Categories: C10 Crate Engines & Cylinder Blocks, C/K Engine

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles
Installation & Fitment

Installation Difficulty

Difficult
Difficult

Advanced skill is required for this installation.

Vehicle Fitment

This product will fit the following C/K years:

  • 1988,
  • 1989,
  • 1990,
  • 1991,
  • 1992,
  • 1993,
  • 1994,
  • 1995,
  • 1996,
  • 1997,
  • 1998,

This product will fit the following C10 years:

Questions & Answers
Only registered users can ask/answer questions. Please sign in or create an account.
Reviews
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account