CJ Classics Shock Tower Cover Outer Passenger Side Mustang 1965-1966

CJ Classics:
83% of 100


  • Direct-Fit Replacement
  • Stamped Steel Construction
  • Passenger Side Specific
  • Comes with Pre-Drilled Holes
MSRP $52.99
You save 15%

CJ Classics Passenger Side Outer Shock Tower Cover for 1965 and 1966 Mustangs.

Do you need a new Passenger Side Outer Shock Tower Cover for your vintage 1965-1966 Mustang? This one-piece CJ Classics Passenger Side Outer shock tower cover 3630G is made of sturdy stamped steel and includes pre-drilled holes to make mounting it as simple as possible.

This CJ Classics part covers the top of the coil spring and bolts to the inner shock tower. This shock tower cover serves two important purposes: it acts like a spring retainer in case of a failure and it provides a mounting point for the shock tower bumper. It'll fit much better than a standard reproduction outer shock tower cover since it's made of stronger steel.

Features and Benefits:
- Durable Stamped Steel
- Pre-Drilled Holes for Easy Mounting
- Bolts to Inner Shock Tower
- Functions Like Spring Retainer in Case of Failure
- Mounting Point for Shock Tower Bumper

Please Note: This shock tower cover is for the passenger side only. If you need a shock tower cover for the driver side, please see CJ Pony Parts # 3630H.

California Residents: Proposition 65 Warning

Video Transcript

We're here with Dynacorn's Outer Shock Tower Cover for '65 through '66 Mustangs. The shock tower cover serves two purposes. It works as a spring retainer in case of a failure, also provides a mounting point for your shock tower bumper. Take a closer look at the Dynacorn piece versus the standard reproduction.

You can immediately see a difference in the way the two pieces are made. The Dynacorn piece is one piece stamped steel. Your standard reproduction has been cut and wielded together. You can also see in this section here how uneven that's cut; you may have some clearance issues with your coil spring. Dynacorn also includes your shock tower bumper, where your standard reproduction does not.

Here we have 1965 Mustang being restored by CJ Pony Service. See the holes where the tower cover's going to mount right here. Here we have our typical reproduction. You can see even when the holes are lined up on the top, the sides aren't even close, same issue over here. Not only that the cover is actually hitting our coil spring.

Now this is our Dynacorn Shock Tower Cover. You can see how the holes line up much better. Everything is viewable, you still may have to open it up just slightly if you've had the apron replaced or the tower's been replaced. See the overall fit is much better, plenty of clearance around the spring as well.

As you can see for only a couple of bucks more than your standard reproduction, you get a piece that not only fits well; it includes a shock tower bumper as well.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Complete Your Package
Add to Cart