cp-e Intercooler Race V2 Delta Core Dissipate Front Mount EcoBoost 2015-2023

The largest aftermarket core is here at CJ Pony Parts, built to push your horsepower even further. The installation of a cp-e Race V2 Delta Core Dissipate Front Mount Intercooler FDCK00005D requires no modification on your 2015-2023 EcoBoost Mustang. The bar and plate design ensures high efficiency for proper and even engine cooling.

Cp-e developed the perfect EcoBoost Front Mount Intercooler end tank, that not only encloses the monstrous core but also requires absolutely no modification. With the laser cut brackets, the intercooler will mount in the stock location while matching up to the stock intercooler piping for manageable future modifications if necessary.

Feature and Benefits:
- Clean Black Finish
- Maximized 21”x17”x3.75” Core Size
- Low Turbulence End Tank Design
- Minimal Pressure Drop
- Substantially Lower and More Consistent Charge Temps
- Bolt-in Design without any Modification
- Fully Cast End-Tanks
- Compatible with Big Turbo Upgrades and Stock

Cp-e intercooler includes fully cast end tanks that are welded and pressure tested with the core to virtually eliminate turbulence within them. Cp-e has eliminated the concern over large cores and the turbulence within the endtanks by directing the air to bring the most optimal airflow as well as an even distribution throughout the core. In intercoolers, the back half of the core only does 25 percent of the cooling; however, this intercooler directs the air properly into the core for even cooling, giving the Mustang the most consistent conditions going into the engine.

Please Note: Due to the massive size, this core requires that the active grille shutters are removed. This is completely reversible and does not require permanent modification to the vehicle.