Diode Dynamics Ditch Light SS3 LED Pro White Combo Kit With Amber Backlight Bronco 2021-2023

Diode Dynamics:


  • Combo Beam Angle
  • A-Pillar Location
  • 6000K Color Temperature
  • Made in the USA
MSRP $360.00
You save $0.05

Diode Dynamics SS3 LED Pro White Combo Ditch Light Kit with Amber Backlights for 2021, 2022, and 2023 Ford Broncos.

These SS3 LED Pro Ditch Lights (DD7186) shine in a Combo beam pattern, which uses both Driving and Flood optics to light your way through dark nights. The cool white output is great for visibility and will match most factory LED lighting on your 2021-2023 Bronco. Using the parts in this Diode Dynamics Kit, easily mount the two SS3 Pods to the factory mounting points near the A-pillar location above the hood. 

Features and Benefits:
- Tested to SAE Standards for Long-Term Operation, Vibration, Corrosion, Etc.
- 6000k Color Temperature Is a True Cool White Output 
- Mount Two Stage Series LED Pods in the A-Pillar Location
- Uses Accessory-Ready Factory Mounting Points for a Simple Installation
- Advanced TIR Optics Provide High Efficiency and Focus
- No Cutting or Drilling Required 
- Will Not Interfere with the Antenna, or Raising and Lowering the Hood
- Brilliant Amber Backlight Functionality
- Engineered and Assembled in USA

Diode Dynamics used optical simulation modeling to create highly-effective beam patterns, including the Combo beam. The Combo pattern shines light downrange in a focused, rectangular 65x25 degree beam. On the Combo lens, you'll notice a flood optic on one side and a driving optic on the other for an excellent blend of output.  

- Measured Lumens: 3,000 lm
- Intensity (cd): 35,100 cd
- Color Temp (CCT): 6000K
- Beam Angle: Combo (Driving and Flood)
- Power (watts): 36
- Operating Voltage: 9-16V
- Current (amps @ 12.8V): 2.7
- Polarity: Polarity Specific
- Operating Temperature: -40C to 85C (-40F to 185F)
- LED Emitter: Cree XP-L HI
- Connector(s): Deutsch DT Input
- Materials: Polycarbonate Lens, Aluminum Casting, Rubber Gasket
- Cooling: Passive, Pin-Fin heatsink
- Compliance Ratings: SAE J575 Durability Test
- Intrusion Ratings: IP69K Waterproof, High Pressure
- Unit Weight (lb): 2.15
- Product Weight (lb): 3.1
- Shipped Weight (lb): 5.25

An excellent auxiliary lighting solution, the SS3 Pro Ditch Light differs from traditional optics like reflectors and simple lenses. While these tend to lose as much as ten percent of light internally and to glare, the custom-engineered TIR optic in the SS3 collects all light from the LED and focuses it on your target. 

Tech Tip: For states that require them, Diode Dynamics also offer snap-on covers for your SS3 Pod.

Vehicle Fitment:
- 2021-2023 Ford Bronco

California Residents: Proposition 65 Warning

Installation Videos

Vehicle Fitment

This product will fit the following Bronco years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account