Edelbrock Camshaft Performer-Plus Kit Ford FE 352-428 V8

Don't settle for average torque and throttle response. Use the Performer-Plus Camshaft Kit (2106) to optimize torque in the low-end to the mid-range. Get serious results when you pair the Camshaft with a Performer manifold and your Ford FE 352-428 V8 Engine. Edelbrock designed the kit as a smooth idling cam for daily drivers, trucks, and 4x4s alike. It has been optimized for vehicles operating from off-idle to 5500 rpm.

Features and Benefits:
- Optimum Torque from Low-End to Mid-Range 
- For Vehicles Operating from Off-Idle to 5500 RPM 
- Smooth Idling Cam
- Includes Flat Tappet Lifters, Assembly Lube, and Instructions 
- Better Throttle Response and Torque 

When you refer to the manifold section, you'll notice torque graphs displaying the power gains from Performer manifolds and Performer-Plus cams. You're sure to notice an increase in torque and throttle response when you take your newly-enhanced vehicle out for a spin. 

Specifications:
- Intake Duration: 194 Degrees 
- Exhaust Duration: 204 Degrees
- Intake Lift: .460”
- Exhaust Lift: .480”
- Lobe Separation: 110 Degree
- Intake Center Line: 105 Degree
- Vacuum: 16 Inches 

Tech Tip: This cam produced 410 Ft Lbs of Torque when paired with Performer 390 intake manifold P/N: EDL2105 and stock cylinder heads. Will not work in 427 side-oilers.