Mustang Camshafts & Valvetrain Components 1964-2020

Camshafts, Rocker Arms & Valve Train

Mustang Camshafts & Valvetrain Components 1964-2020

Camshafts, Rocker Arms & Valve Train
The camshaft, rocker arms and valve train are some of the most vital components to making the engine in your Mustang work. While upgrading these parts isn't easy, it can pay off in the performance of your Mustang. CJ Pony Parts sells any of the Mustang Camshafts, Rocker Arms & Valve Train parts you need, making that part of the upgrade easy! Order today!

Showing 1-20 of 567 results

Page
per page
Set Ascending Direction

Showing 1-20 of 567 results

Page
per page
Set Ascending Direction

Camshafts, Rocker Arms & Valve Train

The Mustang camshaft is one of the most important components of the engine. It controls the valve in the Mustang intake manifold and exhaust valves. The Mustang camshaft is responsible for telling these valves when to open, how long to stay open, how far to stay open, when to close, and how fast to close, making the Mustang camshaft vital to the functionality and performance of the Mustang engine.

Because the Mustang camshaft controls those valves, which control the flow of air and fuel to your engine, it's very important that your Mustang camshaft is working and timed properly so the valves are opening and closing at the right point in the stroke of the piston. To help manage the timing, every Mustang camshaft is attached to the Mustang crankshaft, either directly through gears, or indirectly via the timing belt or chain, so it's timing is correct every time.

Because of the variety of Mustang engines, there are many different Mustang camshaft options available. Originally, through 1996, the Mustang came with a single Mustang camshaft in each of the overhead valve (OHV) engines available. In 1996, the new 4.6L V8 was introduced, which started as a single overhead camshaft (SOHC) system, then was expanded to dual overhead camshaft (DOHC) in 2005. The new Coyote 5.0 V8 maintains this Mustang camshaft configuration. For 'V' configuration engines, each engine with a SOHC setup will have two camshafts, one per cylinder bank, and DOHC engines will have four camshafts, two per cylinder bank.

Replacing a Mustang camshaft isn't for the faint of heart, and should only be done by an expert in automotive repair. However, CJ Pony Parts sells many options for replacing or upgrading your Mustang camshaft and can even install it for you at CJ Pony Service. You can get an upgraded cam for classic engines, like the 351W, 351C, 289 or 302, and the 429 or 460. Alternatively, upgrade your more modern 4.6-liter or 5.4-liter, 5.0-liter, or even Coyote.