AMK Products Master Engine Fastener Kit 250 1969-1973
AMK Products:
69D-SX
MSRP $100.00
$99.99 You save $0.01
Earn points.
Product Description
AMK Products Master Engine Fastener Kit for 1969, 1970, 1971, 1972 and 1973 Mustangs with a 250 6-Cylinder Engine.
This Master Engine Fastener Kit from AMK Products includes 90 total pieces of factory correct, OE style fasteners that are required to properly reassemble the engine components which attach to the long-block on your 1969-1973 Mustang's 250 6-cylinder engine. This kit is specifically assembled for all 1969-1973 Mustangs with a 250 6-cylinder engine.
AMK Products' Master Engine Fastener Kit includes individually packaged sets of hardware for various applications on your 1969-1973 Mustang's 250 6-cylinder engine. Each package is thoroughly labeled so you know exactly where it goes on your 6-cylinder engine. The individual sets of hardware also include the total number of pieces that are required for the specific application. Most of the included fasteners are either meticulous reproductions of the originals or new old stock!
Master Engine Fastener Kit Includes:
- Air Cleaner: Wing Bolt (1)
- Air Cleaner Heat Shroud: Nut/External Washer Assembly (2)
- Air Cleaner Snorkel: Hex Washer Head Screws (2)
- Carburetor: Studs, 7/16" Nuts (4)
- Carburetor Spacer to Intake Manifold: Hex Bolts (4)
- Crank Pulley: Hex Place Bolts (3)
- Crankshaft Damper: 9/16"-18 x 1-3/4" Grade-8 Hex Bolt, Flat Washer (2)
- Distributor: Hex Screw/Split Washer Assembly (1)
- Distributor Points and Condenser Single: Slot Pan Head Machine Screws (3)
- Distributor Vacuum Unit: Slot Pan Head Screws (2)
- Engine Block Drain Plugs: External Hex Pipe Plugs (2)
- Engine Fan: 2-3/8" Hex Screw/Split Washer Assembly (4)
- Exhaust Manifold: Special "Ramp-Lok" Bolts, 2 with Studs (11)
- Fuel Pump: Hex Screw/Split Washer Assembly (2)
- Oil Pan: Special Hex Screw/Split Washer Assembly, Hex Screw/Conical Spring Washer Assembly (24)
- Starter: Hex Screw/Split Washer Assembly (3)
- Timing Cover: Flange Bolts (7)
- Valve Cover: Special Hex Screw/Split Washer Assembly (7)
- Water Neck: Hex Bolts (2)
- Water Pump: Hex Bolts (4)
Buying individual sets of engine hardware for your 1969-1973 Mustang's 250 6-cylinder engine can be expensive and time consuming if you're not sure which hardware you need. This Master Engine Fastener Kit makes it easy by including authentic style hardware that specifically fits your 1969-1973 Mustang equipped with a 250 I6 engine. With a Master Engine Fastener Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing your 1969-1973 Mustang's 250 6-cylinder engine is going to be reassembled with the finest factory correct hardware on the market!
AMK Products produces the most factory correct hardware for your classic Mustang. No matter what kind of Mustang you're building, there's no company better for nuts and bolts than AMK Products!
AMK Products' Master Engine Fastener Kit includes individually packaged sets of hardware for various applications on your 1969-1973 Mustang's 250 6-cylinder engine. Each package is thoroughly labeled so you know exactly where it goes on your 6-cylinder engine. The individual sets of hardware also include the total number of pieces that are required for the specific application. Most of the included fasteners are either meticulous reproductions of the originals or new old stock!
Master Engine Fastener Kit Includes:
- Air Cleaner: Wing Bolt (1)
- Air Cleaner Heat Shroud: Nut/External Washer Assembly (2)
- Air Cleaner Snorkel: Hex Washer Head Screws (2)
- Carburetor: Studs, 7/16" Nuts (4)
- Carburetor Spacer to Intake Manifold: Hex Bolts (4)
- Crank Pulley: Hex Place Bolts (3)
- Crankshaft Damper: 9/16"-18 x 1-3/4" Grade-8 Hex Bolt, Flat Washer (2)
- Distributor: Hex Screw/Split Washer Assembly (1)
- Distributor Points and Condenser Single: Slot Pan Head Machine Screws (3)
- Distributor Vacuum Unit: Slot Pan Head Screws (2)
- Engine Block Drain Plugs: External Hex Pipe Plugs (2)
- Engine Fan: 2-3/8" Hex Screw/Split Washer Assembly (4)
- Exhaust Manifold: Special "Ramp-Lok" Bolts, 2 with Studs (11)
- Fuel Pump: Hex Screw/Split Washer Assembly (2)
- Oil Pan: Special Hex Screw/Split Washer Assembly, Hex Screw/Conical Spring Washer Assembly (24)
- Starter: Hex Screw/Split Washer Assembly (3)
- Timing Cover: Flange Bolts (7)
- Valve Cover: Special Hex Screw/Split Washer Assembly (7)
- Water Neck: Hex Bolts (2)
- Water Pump: Hex Bolts (4)
Buying individual sets of engine hardware for your 1969-1973 Mustang's 250 6-cylinder engine can be expensive and time consuming if you're not sure which hardware you need. This Master Engine Fastener Kit makes it easy by including authentic style hardware that specifically fits your 1969-1973 Mustang equipped with a 250 I6 engine. With a Master Engine Fastener Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing your 1969-1973 Mustang's 250 6-cylinder engine is going to be reassembled with the finest factory correct hardware on the market!
AMK Products produces the most factory correct hardware for your classic Mustang. No matter what kind of Mustang you're building, there's no company better for nuts and bolts than AMK Products!
