Flaming River Power Rack And Pinion Cradle Kit For OEM Spindles Paintable Tilt Column Mustang 1965-1966

Full power assist and rack and pinion performance for your project. Flaming River offers these Rack and Pinion Kits, retaining full turning radius and bolting to your existing chassis with no suspension modifications required.

Features and Benefits:
- NEW Power Rack and Pinion with Lifetime Serviceability
- Stronger Rack Gear - 1 inch diameter
- More than 6 inches of travel and Full Turning Radius
- Bolts into Existing Chassis with no Suspension Modification
- Fluid and Pressure Tested and Certified

Flaming River offers full power-assisted rack and pinon stering for your classic Mustang. The cradle mounts in the original chassis location with no modifications, and the center support does not have to be removed.

This Kit Includes:
- Mounting Hardware
- Wiring Connector
- Universal Joints
- Patented Rack & Pinion Cradle System
- Power Steering Pump with Bracket and Pulley
- Aluminum Mounting Reservoir (Hoses sold separately)

Please Note: This kit is recommended for a vehicle with a 289/302/351W motor and automatic transmission. If you are not using the original exhaust manifolds, custom headers or part # EXHD69 Small Block Exhaust Headers may be required for installation of this rack and pinion cradle system.