Flowmaster Exhaust 2.5" Stainless Steel With 2.5" Polished Tips Kit 1965-1966
Highlights
- 2.5" Cat-Back Exhaust System
- 2-1/2" Mandrel-Bent Stainless
- Super 44 Mufflers
- Includes Clamps And Hardware
Flowmaster 2-1/2" Stainless Steel Exhaust Kit with 2-1/2" Polished Tips for 1965-1966 Mustangs.
This is Flowmaster's stainless steel American Thunder 2.5" Cat-Back exhaust system with polished stainless steel tips for 1965-1966 260/289/302 Mustang coupes and fastbacks. System features 2-1/2" mandrel-bent stainless steel H-Pipe, intermediate pipes, and polished stainless steel tailpipes with Super 44 American Thunder mufflers to give you that signature Flowmaster sound. Includes all clamps and hardware needed for installation. Designed to be used with long tube headers. Flowmaster says this exhaust kit will provide your Mustang with a moderate (noise level) sound.
Note: This kit will fit 1965-1966 convertibles with modifications to the H-pipe portion of this kit. Without modifications, the H-pipe interferes with the convertible floor bracing.
*The exhaust tips are not designed to work with the factory GT rear valance, they sit directly below the valance.When you're looking for an exhaust for your Mustang, every owner needs to check out Flowmaster's exhaust systems and mufflers. Flowmaster is a manufacturer of just about any part you need for your Mustang's exhaust, from full exhaust systems and exhaust kits, to mufflers and accessories. Flowmaster is widely known for their distinctive 'Flowmaster sound,' which is available in mild, moderate, and aggressive tones. CJ Pony Parts is proud to partner with Flowmaster, so you know you can find the perfect muffler or exhaust system for your Mustang right here today! Browse the dozens of Flowmaster products CJ's proudly offers today!
Upgrade to this Flowmaster (817273) 2-1/2" Stainless Steel Exhaust Kit with 2-1/2" Polished Tips for your 1965-1966 Mustang today from CJ Pony Parts!
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Exhaust, Mustang Dual Exhaust Kits, Restomod Parts, Restomod Exhaust
Installation Difficulty
Advanced skill is required for this installation.
Installation Videos
Video Transcript
Alex: Thank you for having me Bill. How are you doing today?
Bill: I'm doing good. We all know the two chamber Flowmaster. If you had a Fox Body back in the day you had some Flowmasters on it. But what else can you tell us about your company?
Alex: Well, Flowmaster is an aftermarket performance exhaust manufacturer, Bill, that started off on the racetracks. Ray Flugger, the founder of the company, designed mufflers for racers that were being hammered for excessive noise limits. Flowmaster presents that opportunity where you're able to reduce those dB levels without having to hurt or kill performance. Flowmaster is also one of the most significant speed parts of all time where we are actually an innovative product different from the standard that's out there.
Bill: The two chamber Flowmaster that was the original product he was selling out of a suitcase.
Alex: The 40 Series, except with some slight modifications on the case itself. Back then it was a square case and now it's more of a round oval.
Bill: The other mufflers you have here, what can you tell me about them?
Alex: Here we have a 50 Series Delta Flow to the far right, which is a three chamber design, a little more subdued, a little mellower for those that are looking for less interior resonance. In the middle here we've got a Super 40, which is a two chamber design, a little thicker, a little wider, which is set up to handle higher output applications. To the far left we've got a Super 44, which is the latest and greatest two chamber design that Flowmaster has released in recent years.
Bill: Is that still based off of the original design?
Alex: That is correct.
Bill: I know Flowmaster has a lot of kits available for the 2005 and newer Mustangs. What can you tell me about these two kits you brought with you today?
Alex: Well, Bill here we've got a Force II exhaust system from Flowmaster. It's a direct bolt on axle back 409 stainless steel with a limited lifetime warranty, fully constructed here in the U.S. It's got the rolled edge stainless steel tip with the nice four inch diameter. All of the hardware, everything you need, is included within the kit so you don't have to buy any additional accessories.
This would probably take you an hour and a half to install out of your own garage on a weekend. Very subdued, very mellow kind of tone, something designed for someone who's looking for more of a performance aspect with a little bit of rumble, nothing too wild, nothing too crazy.
Over here on the right we've got the Outlaw System. The Outlaw is very noticeable, very aggressive. It's the 'hear me from a mile away' type of sound, something I would only recommend to those who are fully aware of what they're getting. It utilizes an Outlaw race muffler, basically a muffler that was designed for race applications that are required to run mufflers without a specific dB limit. Again, I only recommend it to those that are looking for the aggressive tone from Flowmaster. It is fully built out of stainless steel, lifetime warranty as well.
Bill: The Outlaw is available for '05 and up for both the 5.0 liter and the 4.6 liter cars?
Alex: That is correct.
Bill: We know Flowmaster that has systems that fit all year Mustangs, but I heard you guys are getting in other parts of the exhaust as well?
Alex: That's right, Bill. We actually just released a full line of stainless steel headers, ceramic coated, very high end piece. They look great. It'll compliment the rest of your exhaust components. We also just released a full line of catalytic converters, both 49 state and carb certified.
Bill: If you're looking for that classic Flowmaster sound, it doesn't matter what year your car is, Flowmaster has a system that will fit your Mustang.
