Flowmaster Single Axle-Back Exhaust System American Thunder 2-1/2" With 3-1/2" Stainless Steel Tip V6 2005-2009
- Tap To View 3D Model
- American Thunder Muffler
- 3-1/2" Polished Tip
- Dyno Tuned
Flowmaster 2-1/2" American Thunder Single Axle-Back Exhaust System with a 3-1/2" Stainless Steel Tip for all 2005, 2006, 2007, 2008 and 2009 V6 Mustangs.
Give your 2005-2009 V6 Mustang a moderately aggressive sound and increase your S197's performance with this American Thunder Single Axle-Back Exhaust System with a 3-1/2" Stainless Steel Tip from Flowmaster!
Features and Benefits of the Flowmaster 2-1/2" American Thunder Single Axle-Back Exhaust System with 3-1/2" Stainless Steel Tips (17421):
- Moderately aggressive sound level
- Made out of aluminized steel
- Mandrel bent 16 gauge tubing
- Improves throttle response and power
- Black muffler with 3-1/2" polished stainless steel tip
- Simple installation
- Comes with all hardware and necessary hangers
- Dyno tuned for maximum performance
- Fits 2005-2009 V6 Convertible or Coupe Mustangs
This Flowmaster American Thunder exhaust is designed to deliver more performance and a better sound to your V6 Mustang. It includes an aluminized steel muffler that is painted black for protection and a polished stainless steel 3.5" tip. The mandrel bent 16 gauge tubing is designed to improve your pony's throttle response and power. Installing this exhaust system is easy and it includes all required hardware and hangers. Flowmaster dyno tunes this axle-back exhaust for maximum performance.
Flowmaster is a manufacturer of just about any part you need for your Mustang's exhaust, from full exhaust systems and exhaust kits, to mufflers and accessories. Flowmaster is widely known for its distinctive 'Flowmaster sound,' which is available in mild, moderate and aggressive tones.
Purchase Flowmaster's 17421 2-1/2" American Thunder Single Axle-Back Exhaust System with a 3-1/2" Stainless Steel Tip for your 2005, 2006, 2007, 2008 or 2009 V6 Mustang from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Intermediate skill is required for this installation.
Alex: Thank you for having me Bill. How are you doing today?
Bill: I'm doing good. We all know the two chamber Flowmaster. If you had a Fox Body back in the day you had some Flowmasters on it. But what else can you tell us about your company?
Alex: Well, Flowmaster is an aftermarket performance exhaust manufacturer, Bill, that started off on the racetracks. Ray Flugger, the founder of the company, designed mufflers for racers that were being hammered for excessive noise limits. Flowmaster presents that opportunity where you're able to reduce those dB levels without having to hurt or kill performance. Flowmaster is also one of the most significant speed parts of all time where we are actually an innovative product different from the standard that's out there.
Bill: The two chamber Flowmaster that was the original product he was selling out of a suitcase.
Alex: The 40 Series, except with some slight modifications on the case itself. Back then it was a square case and now it's more of a round oval.
Bill: The other mufflers you have here, what can you tell me about them?
Alex: Here we have a 50 Series Delta Flow to the far right, which is a three chamber design, a little more subdued, a little mellower for those that are looking for less interior resonance. In the middle here we've got a Super 40, which is a two chamber design, a little thicker, a little wider, which is set up to handle higher output applications. To the far left we've got a Super 44, which is the latest and greatest two chamber design that Flowmaster has released in recent years.
Bill: Is that still based off of the original design?
Alex: That is correct.
Bill: I know Flowmaster has a lot of kits available for the 2005 and newer Mustangs. What can you tell me about these two kits you brought with you today?
Alex: Well, Bill here we've got a Force II exhaust system from Flowmaster. It's a direct bolt on axle back 409 stainless steel with a limited lifetime warranty, fully constructed here in the U.S. It's got the rolled edge stainless steel tip with the nice four inch diameter. All of the hardware, everything you need, is included within the kit so you don't have to buy any additional accessories.
This would probably take you an hour and a half to install out of your own garage on a weekend. Very subdued, very mellow kind of tone, something designed for someone who's looking for more of a performance aspect with a little bit of rumble, nothing too wild, nothing too crazy.
Over here on the right we've got the Outlaw System. The Outlaw is very noticeable, very aggressive. It's the 'hear me from a mile away' type of sound, something I would only recommend to those who are fully aware of what they're getting. It utilizes an Outlaw race muffler, basically a muffler that was designed for race applications that are required to run mufflers without a specific dB limit. Again, I only recommend it to those that are looking for the aggressive tone from Flowmaster. It is fully built out of stainless steel, lifetime warranty as well.
Bill: The Outlaw is available for '05 and up for both the 5.0 liter and the 4.6 liter cars?
Alex: That is correct.
Bill: We know Flowmaster that has systems that fit all year Mustangs, but I heard you guys are getting in other parts of the exhaust as well?
Alex: That's right, Bill. We actually just released a full line of stainless steel headers, ceramic coated, very high end piece. They look great. It'll compliment the rest of your exhaust components. We also just released a full line of catalytic converters, both 49 state and carb certified.
Bill: If you're looking for that classic Flowmaster sound, it doesn't matter what year your car is, Flowmaster has a system that will fit your Mustang.