Heater Blower Motor Switch Resistor Mustang 1965-1967
CJ's Part Number:
Heater Blower Motor Switch Resistor 1965-1967 is rated out of 5 by 11.
- Direct-Fit Replacement
- Regulates Flow Of Current
- OEM-Style Reproduction
- Maintains Cabin Temperatures
Heater Blower Motor Switch Resistor for 1965-1966 Mustangs and 1967 Mustangs without Air Conditioning.
California Residents: Proposition 65 Warning
Rated 4 out of 5 by Jerry from But did not come with screws Easy to install. I broke off the original nylon rivets and inserted a bolt from inside the box with lock washer and nut outside. But I still get one speed from a three speed heater. Be careful, I cracked the upper part of heater box using too much force. Duct taped it for now.
Date published: 2015-12-12
Rated 5 out of 5 by 66stang1 from Fixed my heater Worked just as I hoped . Quick , easy install. My heater only worked on one speed and the mechanic suggested to live with it till it went out , because it'd be hundreds to fix it. Did some research and everywhere pointed to this part . Low and behold the wire on this was broken and now I have multi speeds !!
Date published: 2017-01-12
Rated 4 out of 5 by Yosamitiesam1 from Blower motor resistor pack fitted the HBA367-68 W/O A/C HEATER BOX ASSEMBLY that I had previously bought and looks to be of good quality. As always the purchasing and shipping went smoothly on this order which included a number of items as well as this one.
Date published: 2015-11-16
Rated 5 out of 5 by Mustang Mike 1223 from not needed if ordering the heater box I ended up sending the resistor back as it was already installed on the heater box I also bought at the same time. If this resistor is of the same quality, it will preform flawlessly.
Date published: 2015-07-05
Rated 4 out of 5 by Jeepstang65 from Worked as it should Direct replacement. Should be noted that it does not come with the fasteners. I used vinyl rivits. It did restore the three speeds of my heater. Did not assist with output.
Date published: 2019-02-18
Rated 4 out of 5 by Paul from Portland from Looks good, but what about fasteners? I'm in hopes of replacing this without needing to open up the heater box. Are there replacement pin fasteners available for this?
Date published: 2017-09-28
Rated 5 out of 5 by jc womper from the part was a twin to the original everything I have bought for my 1966 mustang convertible over the years from cj pony has been excellent !
Date published: 2016-10-27
Rated 5 out of 5 by grumpyoldcarguy from Perfect fit, great looking. This resistor is an exact match to the original part for the ones looking for a concourse appearance.
Date published: 2018-08-21
Do you sell the original type push in plastic mounting hardware. Mine were original and so brittle they just broke
Sorry we do not.
Date published: 2020-04-06
I have a 68. This looks like the replacement. Will it work ??
Sorry it will not.
Date published: 2019-05-19
Will this work in early bronco heater box? Not concerned about fit, just ohms.
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Date published: 2017-11-01
Will this resistor work on my 1966 mustang, 289, without an air conditioner?
Yes it will.
Date published: 2017-01-05
Is there a different switch for a 66 with AC
This fits any 1966 Mustang.
Date published: 2017-01-27
Where are the fasteners that attach it to the box? How are they installed?
It uses two screws, on the left and right sides of the product. It attaches directly to the heater blower motor.
Date published: 2019-12-26