Heater Box Assembly 2-Speed 1964-1965

Free Shipping on Automotive Parts
CJ's Part Number: HBA1
MSRP: $197.99
CJ's Low Price:
$189.99
1560729600 16268
Earn 94 RPM Points What's this?
Heater Box Assembly 2-Speed 1964-1965
Heater Box Assembly 2-Speed 1964-1965 Heater Box Assembly 2-Speed 1964-1965 Heater Box Assembly 2-Speed 1964-1965 Heater Box Assembly 2-Speed 1964-1965 Heater Box Assembly 2-Speed 1964-1965 Heater Box Assembly 2-Speed 1964-1965 Heater Box Assembly 2-Speed 1964-1965 Heater Box Assembly 2-Speed 1964-1965

Product Description

Heater Box Assembly for 1964-1965 Mustangs with a 2-speed heater motor.

Are you looking for the most professional method for restoring your 1964-1965 2-Speed Heater Motor Mustang? When you’re replacing your heater box assembly, make sure you ensure excellence with this premium, long lasting, and faithfully correct assembly that directly replaces your factory original! Get your today from CJ Pony Parts!

Features and Benefits:
- Premium Quality Construction
- Classically Faithful Reproduction
- Directly Replaces Factory Original

This heater box assembly consists of the front and rear casings with doors. This is a factory type fiberglass two piece heater box/heater core casing. This heater box is a pre-assembled unit which includes the gasket and all seals. The heater plenum attaches to this assembly and directs warm air to the car.

Whether you’re looking for an exterior mirror, wheels and tires, headlights and tail lights or a set of interior upholstery, CJ’s has what you need to complete your classic Mustang restoration with ease! CJ Pony Parts has all the parts you need to bring your early model coupe, convertible or fastback Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order this new replacement Heater Box Assembly for your 1964-1965 2-Speed Heater Motor Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Heater Plenums  

Installation Instructions

Difficulty

Difficulty: Moderate

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Heater Box Assembly 2-Speed 1964-1965 is rated 4.5 out of 5 by 2.
Rated 5 out of 5 by from Nice Looking Piece, Works Beautifully!!!..... The Heater Unit in My 64.5 Coupe was Not Working at All it was Shot, Along with Buying this New Heater Box Assembly, I also Bought New Defroster Ducts...Heat Plenum, New Brass Heater Core and New Russell Stainless Steel Black Braided Heater Hoses. For Me This Heater Box Assembly was the Way to Go, Along with the Box it Came All New Gaskets, its Just a Nice Looking Part. Install was Straight Forward, I Just Took My Time....I Also Took Pictures Before I Removed Any of the Olds Parts, Which Really Helped me When Installing the New Parts.....Removing and Installing All of the Parts Total Time from Start to Finish was Right at 3-1/2 Hours....as I Did All of the Work Myself, But IMO, it Would Really Have Been Better and Faster to Have a 2nd Set of Hands When Installing this Heater Box. Bottom-line, This Heating Unit Now Work Perfectly!!!!....
Date published: 2019-05-03
Rated 4 out of 5 by from Good but needs detail work This box is good quality materials and fit well but it wasn't without problems. The rod to close the vent/heater door was canted at the wrong angle (see photos) and wouldn't allow the door to close correctly in either direction without the cable binding from the sharp angles needed. My solution was removing the rod out of my old box and restoring it instead of trying to torque the new steel rod.
Date published: 2018-11-09
  • y_2019, m_6, d_16, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_HBA1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 184.41ms
  • REVIEWS, PRODUCT

Product Questions

There's no hole for the resistor to fit in, do I have to cut a hole myself?

Asked by: Strongest72
This is for a 2 speed blower that does not use a resistor. Use this one for a 3 speed blower, https://www.cjponyparts.com/heater-box-assembly-3-speed-1965-1966/p/HBA2/
Answered by: rk cjpp
Date published: 2019-04-10

what is the difference in 2 0r 3 speed model and how do I know which I have, not assembled when I got the car.

Asked by: sailnsam
Check your fan switch on your console. 2 clicks to the right =2 speed, 3 clicks = 3 speed.
Answered by: Fisherman58
Date published: 2017-02-15

Does the fan & all gaskets come with the kit

Asked by: MUSTANG
The heater box assembly does not come with a fan motor or a heater core, it does come with the heater core seals and box to cowl seal.
Answered by: rk cjpp
Date published: 2015-10-06

is core included in he heater box?

Asked by: steve65
No, the core is sold separately.
Answered by: CJ Pony Parts
Date published: 2017-01-27
  • y_2019, m_6, d_16, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_HBA1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 168.31ms
  • QUESTIONS, PRODUCT

You Might Also Like