Intellitronix LED Digital Gauge Cluster Replacement 1965-1966
Intellitronix Replacement LED Digital Gauge Cluster for 1965 and 1966 Mustangs.
Restore the function of every gauge in your classic 1965-1966 Mustang while seriously increasing the style inside your pony with this Intellitronix DP7001 Replacement LED Digital Gauge Cluster.
Features and Benefits:
- For 1965-1966 Mustangs
- LED Optics
- DP7001 Available in red, blue, green and white
The included speedometer reads up to 255MPH and features odometer, trip meter, one-button calibration (regardless of tire size, gear ratio, or transmission) and 0-60 time, 1/4 mile ET and high speed recall. The included tachometer which features 0-9,900 RPM in 100 RPM increments, the Water Temperature display with 100-300°F range with the included sender, the Oil Pressure display with 0-100 PSI range using the included sender, Voltmeter display with 7.0-25.5 volt range and Fuel Level display with 0-99% range in 1% increments that will work with the existing Ford fuel level sending unit.
- Direct fit printed circuit boards
- Custom fit "smoked" Plexiglas faceplate
- Universal temperature sending unit
- Oil pressure sending unit
- Speedometer sending unit for vehicles without electronic transmission or cruise control
- Instructions for installation.
Please Note: Instrument bezel is NOT included (sold separately).
Tech Tip: This set includes a 1/2" bushing, if for some reason you would need the less popular 3/8” bushing, you will have to source the bushing on your own. If you have a GM LS engine, then please be aware that you may need adapters (metric to nonmetric) for the sending units. Also, GM LS engines have a Tach output equivalent to a 4 cylinder instead of 8, the tachometer is programmable, so you can set it yourself following the steps in the instructions.
*Only fits 5-gauge style instrument bezel found in 1965 GT Mustangs, 1965 Mustangs with Pony interior and all 1966 Mustangs.
Intellitronix state-of-the-art technology makes them one of the foremost designers and manufacturers of electronics in the automotive industry. By only using the best and most advanced display and engineering techniques, they achieve the highest level of quality and performance for their products surpassing other companies in the marketplace.
Intermediate skill is required for this installation.