Master Power Brake Line Kit Stainless Steel Mustang 1965-1966

Your 1965 or 1966 Mustang needed of a brake conversion and the Master Power Stainless Steel Brake Line Kit MU1088S provides an excellent aftermarket brake line replacement required for this disc brake conversions. Upgrade your braking response and stopping power with this complete front-to-rear, left and right, brake hardline kit for power disc brake conversion installations.

This hard line kit is not a reproduction of the factory lines, but rather has been mechanically designed from conception to fit Mustangs with a Master Power Brakes disc brake conversion kit installed. The hard line kit MU1088S  is designed for dual exhaust vehicles only, however, if you have a single exhaust vehicle, simply convert the hard line mounting to a dual exhaust arrangement for proper fitment. In order to accomplish this conversion, CJ Pony Parts recommends you locate the Combination Valve on the inner fender using the Combination Valve Line Installation Template and then connect the hard lines as necessary.

Kit Includes:
- Front to Rear 3/16" Stainless Steel Hard Line
(9/16"-20 Tube Nut at the valve and 3/8"-24 Tube Nut at the rear hose)

- RH 3/16" Stainless Steel Hard Line
(3/8"-24 Tube Nut at the valve and 3/8"-24 Tube Nut at the Front Brake Hose)

- LH 3/16" Stainless Steel Hard Line
(3/8"-24 Tube Nut at the valve and 3/8"-24 Tube Nut at the Front Brake Hose)

Vehicle Fitment:
- 1965-1966 Mustang with dual exhaust and a Master Power disc brake conversion.