Master Power Front Disc Brake Conversion Kit Pro Driver Manual Transmission Mustang V8 1968-1969

Get peace of mind by upgrading your 1968-1969 V8 Mustang's brakes with this Master Power Pro Driver Front Disc Brake Conversion Kit. This kit is specifically for classic Mustangs with a manual transmission and requires 17" or larger wheels.

Master Power Brakes' Pro Driver Conversion Kit comes with everything you need to get more reliable, better performing brakes. It will replace your drum brakes with disc brakes using 4-piston billet aluminum calipers that are clear powder-coated and 13" directionally veined one-piece slotted, cross drilled and zinc washed rotors. The calipers come with CNC machined black hard coated billet aluminum mounting brackets for a secure installation. The CNC machined T-6061 billet aluminum hubs come pre-assembled with bearings and seals that use Red Line Synthetic Grease. Braided Stainless Steel Brake Hoses come with banjo bolts, crush washers and adapters and will ensure fluid gets throughout your brake system reliably. Also included with the kit is a 7" dual diaphragm booster, 1" bore master cylinder, combination valve kit and hardlines that connect the cylinder a valve kit. For your convenience, all the necessary installation hardware comes with the kit so you can get back on the road in no time.

Master Power DB45222PS Pro Driver Front Disc Brake Conversion Kit Features and Benefits:
- 4-Piston Clear Powder-Coated Billet Aluminum Calipers
- 13" One-Piece Slotted, Cross-Drilled and Zinc-Washed Rotors
- CNC-Machined Billet Aluminum Hubs
- Hub Bearing and Seals using Red Line Synthetic Grease
- CNC-Machined Black Hardcoated Billet Aluminum Caliper Mounting Brackets
- Braided Stainless Steel Brake Hoses with Banjo Bolts, Crush Washers and Adapters
- 7" Dual Diaphragm Booster with Mounting Brackets and Hose Kit
- Combination Valve Kit With Mounting Bracket
- 1" Bore Master Cylinder
- Hardlines from Master Cylinder to Combination Valve Kit
- Syringe Bleeder Kit
- Grade 8 Installation Hardware Included
- Fits 1968-1969 V8 Mustangs with Manual Transmission

*Must use V8 disc brake spindles (not included).
*Requires 17” or larger wheels.

Since 1983, Master Power Brakes has manufactured kits for specific models of Mustangs, rather than a kit to fit everything. There specialty kits, made to bolt-on and fit precisely, make installation much easier for those who work on their own Ponies, so you can get back on the road in no time. Every day, those at Master Power Brakes seek to improve brake technology and keep enthusiasts and daily drivers alike at peak performance.

Order this Master Power (DB45222PS) Pro Driver Front Disc Brake Conversion Kit for your 1968 or 1969 V8 Mustang with a Manual Transmission from CJ Pony Parts today!