MBRP Axle-Back Exhaust System 2-1/2" Aluminized Series GT 2005-2010/GT500 2007-2010

MBRP:
S7200AL
Rating:
83% of 100

Highlights

  • 2-1/2" Aluminized Axle Back
  • Heavy Gauge Aluminized Steel
  • Requires No Cutting Or Welding
  • Maximized Exhaust Flow
MSRP $364.40
$294.99
You save 19%

MBRP Aluminized Series 2-1/2" Axle-Back Exhaust System for 2005, 2006, 2007, 2008, 2009 and 2010 GT Mustangs and 2007, 2008, 2009 and 2010 GT500 Mustangs.

Upgrading exhaust, especially the axle-back, is a top priority for Mustang owners. Ford modular engines sound amazing and we want to hear them. MBRP's axle-back pumps up the decibels without making your ears ring. The axle-back is subtle and civilized during normal driving and seriously aggressive when you stomp on the go pedal!

Make your GT or GT500 sound like a true muscle car with MBRP's axle-back exhaust system. While designing this exhaust, MBRP spent countless hours on the dyno and hundreds of miles on the street and track to ensure the best performance possible. MBRP designed their axle-back to maximize exhaust flow and minimize exhaust temperatures providing better fuel economy, performance and life expectancy. Heavy duty aluminized steel axle-backs offer a value price without compromising on the quality. This axle-back is finished off with a set of polished to stainless steel 3-1/2” tips that will look great exiting the rear of your S197 Mustang.

Features and Benefits:
- Designed to Maximize Exhaust Flow
- Subtle and Drone-Free
- Aggressive Exhaust Note When Needed
- Aluminized Heavy Gauge Steel
- Stainless Steel 3-1/2" Polished Tips
- Includes All Necessary Hardware and Clamps 

*Requires NO cutting or welding.

The Aluminized Series exhaust systems from MBRP are made from 100% heavy gauge aluminized steel. The main focus of the Aluminized Series is to provide the cost conscious consumer with the same high quality design and craftsmanship as MBRP's other systems but at a value price. Aluminized axle-backs are suitable for areas with moderate environmental conditions. For those needing an exhaust system that can handle the harshest road conditions, a step up to the XP Series would be in order.

Order the MBRP Aluminized Series 2-1/2" Axle-Back Exhaust System for your 2005, 2006, 2007, 2008, 2009 or 2010 Mustang GT or 2007, 2008, 2009 or 2010 Shelby GT500 Mustang from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

After 10 years of living that stock life, today we're going to give this 2008 GT a little more growl with a new axle-back exhaust from MBRP.

This is MBRP's installer series axle-back, which is an excellent cost-conscious choice for someone looking for more sound on their 2005 to 2010 Mustang GT. It's made of 16-gauge aluminized steel with a set of polished stainless steel tips. It will be a direct replacement for your factory axle-back.

For this installation, you'll need a lift or a jack and jack stands, 3/8th ratchet, 13-millimeter socket, 15-millimeter socket, six-inch extension, and a 13-millimeter wrench.

First step of the installation, obviously, get the car off the ground. Now if it's a year-round driver like ours is, might see some rust and stuff on the bolts. Just spray a little penetrating oil on first. Make it a lot easier to get them off.

I'm going to loosen this clamp to separate the mid-pipe from the muffler. On this case is actually the clamp is off here. The pipe is still kind of tight. We'll try to tap it off with a hammer. Now, if you're still having issues separating the pipe like we are, the next step then is to go back here, start removing the hangers. It'll give you more room to work.

Now before we can install our new MBRP axle-back, we do have to remove this hanger because you actually can't get it up into place with this here. I'm going to install it on the muffler, then put the whole assembly up.

We're going to move the hanger over to our MBRP and put a clamp on and make sure you put it at an orientation where you can tighten it. All right, I'll put the rear clamp on here as well and just start getting everything hand tight.

With the hangers on, now we can go back and tighten the clamp. You'll want to repeat the process on the other side, line up the tips, and your installation's finished.

Our MBRP axle-back definitely looks better. Now let's see how it sounds. Sounds similar to idle, definitely deeper. It has a nice rumble without being too loud.

The MBRP installer series is an excellent choice if you want some more sound for your Mustang but are trying to stay on a budget. The installation's going to be pretty straightforward, figure about an hour or so. Be back on the road in no time.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.