Mishimoto Intercooler Pipe Kit Black Focus RS 2016-2018

A new intercooler pipe kit for your 2016-2018 Focus RS will reduce restriction and improve airflow. This aftermarket Mishimoto Black Intercooler Pipe Kit is just what you need to get both cold- and hot-side pipes to unlock your Focus RS’ full potential! 

Features and Benefits:
- Reduces Restriction and Adds More Volume to Flow of Charged Air
- 5-Ply Silicone Eliminates Need for Additional Couplers
- Easy Installation
- Reinforced with Steel Wire to Stand Up to Same Abuse
- 31% Increase in Internal Volume and 46% Increase in Flow Over Stock Piping
- Full Potential Unlocked When Combined with Hot-Side Kit
- Hot Side Piping Specifically Designed to Direct Air Flow to Front of PTU Cooler
- Wire-Reinforced 5-Ply Silicone Couplers to Ensure Secure Connection to Turbo and Intercooler
- Includes All Hardware Needed for Fortified, Direct Fitment to 2016-2018 Focus RS
- Silicone Couplers Absorb Stresses of Excessive Engine Movement
- Improves Heat and Pressure Tolerance
- 46% and 45% Less Pressure Drop than Stock Cold-Side and Hot-Side Pipes, Respectively
- 31% and 40% Increase in Internal Volume Compared to Stock Cold-Side and Hot-Side Pipes, Respectively
- 35% Less Pressure Drop than Stock Set-Up
- Fits Both Stock and Mishimoto Focus RS Intercoolers
- Designed to NOT Block Off Cooling to PTU 

This Mishimoto (MMICP-RS-16KBK) Black Intercooler Pipe Kit combines the power of both hot-side and cold-side piping for the best air ways to and from your intercooler! This kit features an improved cold-side pipe design that’s flexible enough for easy installation but reinforced with steel wire so it can withstand the same type of abuse as an aluminum pipe.

It also has a specially designed aluminum mid-section that, when united with a pair of dependable silicone couplers on the hot side, will help your RS keep every bit of PSI boost contained in the system! This intercooler pipe kit fits both stock and Mishimoto Focus RS intercoolers, and it will not block cooling to your PTU. 

This Kit Includes:
- 2-1/2" Hot-Side Intercooler Pipe
- Two (2) Silicone Couplers
- 2-1/2" to 2-3/4" Wire-Reinforced Silicone Hose
- Four (4) 3" T-Bolt Clamps
- Two (2) High-Torque Worm Gear Clamps 

Tech Tip: 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).