Mishimoto Oil Cooler Kit With Thermostatic Sandwich Plate Black Mustang GT 2015-2017

During track days, high oil temperatures threaten to sideline your Mustang. Worse still, excessive overheating can cause damage to your engine. These Mishimoto Oil Cooler Kits will stabilize oil temperatures during performance use. 

Features and Benefits:
- Innovative Bar-And-Plate Oil Cooler Mounts in the Upper Grille
- Mounting Bracket Also Serves as An Air Diversion Panel
- Directs the Maximum Amount of Ambient Air Through the Oil Cooler
- Pre-Made Stainless Steel Braided Oil Lines with Durable -AN Fittings
 Comes With Replacement Lower Radiator Hose to Bypass the Stock Fluid-Based Oil Cooler
- Removes The Stock Fluid-Based Oil Cooler for Less Stress on The Engine's Cooling System
- Billet Aluminum Thermostatic Oil Sandwich Plate
- Increases Oil Capacity By One Quart
- Fits With Most Aftermarket Supercharger Kits
- Aluminum Construction with Stealth Black Finish

The Mishimoto engineers designed the heat exchanger from scratch to create the largest version possible. It mounts in the front grille where it receives the most airflow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation.

Vehicle Fitment:
- 2015-2017 GT Mustangs
- NOT for use Right-Hand-Drive (RHD) models.

This Kit Includes:
- (1) Application Specific Mounting Bracket / Air Diversion Shield
- (1) Bar and Plate Oil Cooler
- (1) 2ft 5in Stainless Steel Braided Hose w/ -10AN Fittings
- (1) 4ft 11in Stainless Steel Braided Hose w/ -10AN Fittings
- (1) M22 Thermostatic Sandwich Plate
- (1) Application - Specific, M22 x 1.5 Extended Length Center Bolt
- (2) M20 x -10AN Straight Fittings
- (2) 1/8" NPT Plugs
- (1) Large O-ring
- (1) Lower Radiator Hose w/ Worm Gear Clamps
- (1) Mounting Hardware Set

Please Note: Mishimoto Fully Inspects and Cleans All Products Prior To Packaging. However, It Is Recommended That Customers Flush the Oil Cooler with One Quart of Clean Oil Prior To Installation to Remove Any Debris Accumulated During Shipping.

Tech Tip: Requires the Removal of the Stock Coolant-Based Oil Cooler. Recommended Torque Specification for All Straight Fittings and Banjo Bolts: 15-25 ft/lbs. Do Not Exceed the Maximum Torque Rating Of 35 Ft/Lbs.