MSD 2-Step Launch Master Module 5.0L After 2/23/16 2016-2017

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 113.13ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • Most Reliable Way To Launch
  • Adjustable Launch RPMs
  • Built In Dials On Module
  • Easy Installation
MSRP $272.95
You save 19%

MSD 2-Step Launch Master Module for 2016-2017 5.0L Mustangs Built After February, 23rd 2016.

If you want to really get the most out of your 2016-2017 Mustang's 5.0L Coyote engine, than you'll definitely want to add this MSD 2-Step Launch Master Module (87311) right away! Order yours from CJ Pony Parts today!

Launch Master Module Features:
- Designed for 2016-2017 5.0L Mustangs built after 02/23/2016
- The Best and Most Reliable Way to Launch Hard in Race Settings
- Easily Set Launch RPM for Consistent Hole Shots
- Adjustable Launch RPM from 1,800 to 9,900 RPM
- Module Features Built-In Dials
- Bright Green LED Activation Light
- Easy and Straight-Forward Installation

*This launch module is NOT compatible with 2018 5.0L Mustangs.

MSD wants your time at the track or dragstrip to be awesome, so if you've been searching for that extra boost of power, than this launch module is exactly what you need! You'll be able to launch your Mustang anywhere from 1,800 RPM and 9,900 RPM in 100 RPM increments. It will give your pony more consistent launches, meaning you'll have faster 60-foot times and quicker ET/MPH down the quarter mile. When the 2-Step Module is activated, the set RPM will be held steady. Once the green LED lights up, slip your foot off the clutch and you’re off. The launch RPM can be adjusted by two rotary dials that are built onto the module. Make the most on your race days and purchase this launch module from CJ's now!

Please Note: Due to a manufacturing change in the factory coil pack wiring harness, this will NOT fit 2011-2016 5.0L Mustangs built before February 23rd, 2016. Please see MSD8731 for those models.

If you are looking to improve the ignition or fuel system of your Mustang, then CJ Pony Parts has a wide range of MSD ignition components and fuel system equipment that are sure to correct any problem you may have. MSD is one of the Mustang aftermarket's leading manufacturers of ignition controls, coils, timing accessories, spark plug wires and electronic fuel injection conversion equipment. Browse around and purchase your upgraded MSD parts now from CJ's!

Go ahead and purchase this brand-new MSD (87311) 2-Step Launch Master Module for your newer 2016-2017 5.0L Mustang Built After February, 23rd 2016 today from CJ Pony Parts!

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.52ms
  • bvseo-msg: HTTP status code of 404 was returned;

How do I know? My mustang built after 2/23/2016?

Asked by: Benson
Check the build date on the door jam sticker.
Answered by: rk cjpp
Date published: 2019-07-07

Will this throw check engine lights?

Asked by: Spooky
Not if it is installed correctly.
Answered by: rk cjpp
Date published: 2019-03-24

I've seen videos of people claiming this is how they got 2 step on a an ecoboost mustang. Will this work with a 2017 ecoboost?

Asked by: dsmith98
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: rk cjpp
Date published: 2019-03-21

How is the launch rpm adjusted?

Asked by: Jferg
Here is a link to the instructions.
Answered by: rk cjpp
Date published: 2019-02-26

How to use that on my 2017 automatic mustang gt? What’s mean to have a wire in switch

Asked by: Josh
Here is a link to the instructions.
Answered by: rk cjpp
Date published: 2018-12-10

Why is this not compatible with the 2018? And is there a 2 step that is compatible with the 2018?

Asked by: donniej7878
There were a few changes made to the layout of the ignition system on the 2018. And no, at this time we do not offer a 2-step for the 2018.
Answered by: CJPP Dave
Date published: 2018-09-07

Will this work for 2017 GT automatic? 

Asked by: TheBlue50
Yes but you will have to wire in a switch.
Answered by: rk cjpp
Date published: 2019-06-20

I have a 2017 mustang gt with an automatic transmission could I get the 2 step to activate in neutral as well?

Asked by: mustang217621
This will not work for your application.
Answered by: rk cjpp
Date published: 2018-05-30
  • y_2019, m_11, d_16, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.2
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_MSD87311, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 165.93ms
Complete Your Package
Add to Cart