This model-specific kit comes with everything you need to convert from those tiring manual crank windows to modern push-button power windows. The kit comes with new power regulators featuring AC Delco motors for the front windows and rear quarter windows, black illuminated double button switches that can be mounted to your console or dash, complete and labeled wiring harnesses, as well as conduit to protect the wires traveling through the doors.
- New Power Regulators (4)
- New AC Delco Power Window Motors (4)
- Black Illuminated Double Button Switches (2)
- Complete and Labeled Wiring Harnesses (2)
- Conduit (2)
Constructed from 1018 cold roll steel with bronze Oilite thrust bearings at all the pivot points and feature treated gear plates for longer teeth life. The new power window regulators are designed to bolt directly into the original mounting holes with little to no modifications and will use the original glass channels. Each window regulator is equipped with a new AC Delco OEM motor, ensuring the highest of quality and performance every time you hit the switch.
Each switch features a double button setup that will control 2 windows. The switches are black with white markings and can be illuminated with the correct wiring configuration.
The wiring harnesses come with all the wires labeled for correct positioning and are fused to allow operation of the power windows without the engine running. The black wire is the ground and should be attached to clean metal to ensure a proper ground. The red (orange) wire is the 12V hot feed. If you would like to convert just the front door windows to power, a 1965-1966 fastback kit can be ordered instead, since fastback kits only come with front power window regulators. The front power window regulators are the same for all 1965-1966 body types.
Please Note: We recommend using a kit with crank handle style switches so you are not left with a hole in your door panels where the factory regulator would come through.