Power Window Kit With Black Illuminated Switches Mustang 1969-1970

CJ's Part Number:


  • AC Delco Window Motors
  • 2 Rocker Style Switches
  • Labeled Wiring Harness
  • New Power Regulators
MSRP $763.99
You save 17%

Power Window Kit with Black Illuminated Switches for all 1969-1970 Mustangs.

Add the luxury of power windows to your classic Mustang! This Power Window Kit features Black Illuminated Switches for all 1969-1970 Mustang coupes, convertibles and fastbacks! This kit comes with everything you need to convert from those tiring manual crank windows to modern push-button power windows.

Features and Benefits:
- Power Window Conversion
- Direct Fit Upgrade
- AC Delco Window Motors
- USA Made

This kit includes new power USA-made regulators featuring AC Delco motors for the front windows, black illuminated switches to mount to the doors, a complete and labeled wiring harness, as well as conduit to protect the wires traveling through the doors. Each regulator is constructed of 1018 cold roll steel with bronze Oilite thrust bearings at all the pivot points, and feature treated gear plates for longer teeth life. The new power window regulators bolt directly into the original mounting holes with little to no modifications and will use the original glass channels.

Originally, the switches mount to the doors, however, you can custom mount them anywhere you'd like. One switch features a double button set up to control both front windows, and the other switch uses a single button for the passenger side front window. The switches are black with white markings and can be illuminated with the correct wiring configuration. With a complete and labeled wiring harness already attached to the switches, installation is as simple as finding a location to mount the switches, running the wires and you're ready to go!

This Kit Includes:
- New Power Regulators (2)
- New AC Delco Power Window Motors (2)
- Black Illuminated Switches (2)
- Complete and Labeled Wiring Harness (1)
- Conduit (2)

The wiring harness comes with all the wires labeled for correct positioning and is fused to allow operation of the power windows without the engine running. The black wire is the ground and should be attached to clean metal to ensure a proper ground. The red (orange) wire is the 12V hot feed.

Please Note: Original glue-in style door glass found in 1969 and some 1970 Mustangs may be too weak to handle the new power regulators; it is recommended to replace the old glue with new, stronger glue; or convert to 1970 bolt-in style door glass.

Tech Tip: We recommend using the kit with crank handle style switches so you are not left with a hole in your door panels where the factory regulator would come through.

California Residents: Proposition 65 Warning

Installation Difficulty


Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account