QA1 Rear Suspension System Single Adjustable 250 Lb Spring Rate Chevrolet C10 1963-1972
QA1 Single Adjustable 250 Lb Spring Rate Rear Suspension System for all 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971 and 1972 Chevrolet C10s.
Available in a variety of spring rate choices, this suspension from the masters at QA1 will allow your rig to drop up to a 6" total. Giving you just the right stance you need to get the job done with purpose and pride, this is the suspension system you've been looking for. QA1’s C10 bolt-on rear suspension system is designed to convert trucks originally equipped with a coil-spring rear suspension to coil-overs. Made in the USA, this system relocates the coil-overs to the outside of the frame rail, closer to the wheel, providing more cornering stability and allowing room for popular aftermarket rear fuel tanks. The factory truck arms are replaced with a 7 gauge DOM steel tubular design with an integrated pinion angle adjustment, eliminating the need for angled shims, and feature QA1’s X Series self-lubricating rod ends. With the adjustable length truck arms, you can set the wheelbase to your exact specifications. The adjustable mounts allow for optimum anti-squat. A full-length, adjustable panhard bar with multiple mounting locations corrects roll center geometry for the desired amount of drop. This system also includes your choice of QA1’s proven single or double adjustable Pro Coil Systems so you can change the valving to meet your specific needs. Available with three options of high travel spring rates, these shocks allow for ride height adjustability and are 100% dyno tested and serialized.
This C10 rear suspension system incorporates a bolt-in frame C-notch and allows for up to 6” of total drop.
- Bolt on rear suspension kit for 63-72 C10’s
- Your choice of 170, 200, or 250 LB spring rate
- Single adjustable pro coil system
- Made in the USA
- C-notch kit is included with this kit
- Allows for up to 6” of total drop
- adjustable panhard bar with multiple mounting locations corrects roll center geometry for desired amount of drop
- Adjustable Shocks
- High Travel Springs
- Coil-over Hardware
- Truck Arms
- Panhard Bar
- Brace Bar
- C-Notch Kit
- All Required Nuts, Bolts, etc.
Proposition 65 Warning
In order to improve the suspension of your C10, you need to install some aftermarket suspension equipment. Luckily for our customers, CJ Pony Parts stocks a wide range of vehicle specific suspension equipment from QA1, a leading manufacturer of premium quality front and rear shocks, struts and various other pieces of equipment to improve the handling of your Chevy. QA1 has a firm commitment to keeping the quality of their products above that of their competitors, providing their distributors, like CJ's, with the very best equipment for their valued customers.
California Residents: Proposition 65 Warning