Radiator Aluminum 3-Row 5.0L Engine Swap Bronco 1966-1977
Highlights
- Fits 1966-1977 V8 Broncos
- 3-Row Radiator
- Aluminum Construction
- 5.0L Conversion Radiator
Aluminum 3-Row Radiator for all 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976 and 1977 Broncos with a 5.0L Engine Swap.
If you're swapping a late-model 5.0L engine into your classic 1966-1977 Bronco, you're going to need a radiator that can keep up with the increased performance. That's why CJ Pony Parts is proud to offer this all-new, high-performance Aluminum 3-Row Radiator designed specifically for a 5.0L conversion.
Features and Benefits:
- Bracket Mounted, 3-Row Conversion Style Radiator
- 100% All Aluminum Construction
- Cools Up to 650HP
- Radiator Cap And Transmission Cooler Included
- Fits Manual or Automatic Transmissions
This high-performance radiator is made up of 100 percent aluminum from the tank to the core, and even the welds, without using any epoxy during assembly. With a full aluminum construction, this radiator is nearly 10-20 pounds lighter than copper or brass radiators.
Cooling rows are spaced 3/8" apart giving you 25 percent more rows than most aftermarket aluminum radiators, and almost 35 percent more than OE copper radiators. This radiator also features 14-16 cooling fins per inch providing almost 1,500 more fins than other aluminum radiators and roughly 3,000 more than an OE copper radiator.
Specifications:
- Total: 21" Tall x 25" Wide (including brackets)
- Core: 18-3/4"l x 19-1/8"
- Inlet: 1-1/2" Passenger Side
- Outlet: 1-3/4" Driver Side
- Tanks: 2-1/2" Thick
- Tubes: 0.63" Thick
- Transmission Cooler: 1/8-27NPT
Please Note: This aluminum radiator is only for use on 1966-1977 Bronco's that have converted to a late-model 5.0L engine.
Tech Tip: Although not required, a single 16" electric fan is highly recommended for use with this core size.
California Residents: Proposition 65 Warning