Power Grip Hose Clamp 1-1/2"

Vendor Part Number:
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 113.96ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • Heat-Sensitive Thermoplastic
  • Wider Sealing Area
  • Retains Dynamic Tension
  • Easy Installation

Single 1-1/2" Power Grip Hose Clamp.

To prevent leaks from occurring around the radiator hoses on your classic Ford, you need a tight fitting clamp. Have a look at this Single 1-1/2" Power Grip Hose Clamp from CJ Pony Parts! This unique, new style of hose clamp is made from heat sensitive materials that will shrink and conform to the hose and hose connection for a tight fitting seal.

Power Grip Hose Clamp Features and Benefits:
- Manufactured from Heat-Sensitive Thermoplastic
- Conforms to Hose or Housing Shape
- Wider Sealing Area Covers Connector Bead
- Retains Dynamic Tension So There is Never a Need to Retighten
- Material Memory Prevents Over or Under- Tightening
- Temperature Rating of -40 Degrees Fahrenheit to +302 Degrees Fahrenheit (-40 Celsius to +150 Celsius)
- Easy Installation with Heat Gun

Manufactured from heat-sensitive thermoplastics, this revolutionary clamp has the ability to conform to any hose or housing no matter its shape. The wider sealing area of the clamp even allows it to fit over the raised bead of fitting connectors easily. This power grip hose clamp will retain dynamic tension. What does this mean? It means that you will never have to retighten the clamp! The clamp shrinks and readjusts itself when the engine reaches normal operating temperatures so that the clamp will always be supplying consistent pressure. The clamping force of the power grip clamp even increases as temperatures decrease. No more cold leaks during the coldest of winter days.

This hose clamp is resistant to all automotive fluids such as oil, antifreeze, and brake fluid. It is even more environmentally friendly since it will eliminate antifreeze leaks which in turn stops ground water contamination. Installation of the hose clamp is easy, even in hard-to-reach places. No need for a screwdriver, with just an ordinary heat gun, you can have this clamp fastened in no time.

*Sold individually.

Power Grip Clamp Specifics:
- Fits Hose (O.D.) – 1-3/4” to 2”
- Width – 1.125”
- Nominal Hose I.D. – 1.5”
- Hose O.D. Min – 1.75”
- Hose O.D. Max – 2”
- Fits Most V8 Upper Radiator Hoses

Order this Single 1-1/2" Power Grip Hose Clamp from CJ Pony Parts today!

Installation Videos

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.16ms
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 112.97ms
  • bvseo-msg: HTTP status code of 404 was returned;