Rally Innovations Front Splitter Rally 1 Aluminum Three-Piece Matte Black EcoBoost/GT 2018-2020

Rally Innovations:
FO-P8T-FSP-03
Rating:
94% of 100

Highlights

  • Matte Black Finish
  • Aluminum Construction
  • Direct Fit
  • Made In The USA
$279.99

Rally Innovations Matte Black Rally 1 Three-Piece Aluminum Front Splitter for 2018, 2019 and 2020 EcoBoost and GT Mustangs.

If you're looking to turn your brand-new 2018-2020 GT or EcoBoost Mustang into a sporty performance machine, than consider adding this premium Rally Innovations Matte Black Rally 1 Three-Piece Aluminum Front Splitter FO-P8T-FSP-03 to the exterior! Order your body kit from CJ Pony Parts today!

Features and Benefits:
- Direct-fit for 2018-2020 EcoBoost and GT Mustangs
- Rally 1 three-piece design constructed from premium 11-gauge aluminum
- Each piece features an aggressive matte black powder-coated finish
- Quick and easy bolt-on installation with all mounting hardware included
- Proudly made here in the USA

Rally Innovations designed this brand-new Rally 1 front splitter to be a direct-fit upgrade to your newer Mustang! Each of the three (3) pieces are manufactured using high-quality aluminum and feature a durable matte black powder-coat finish. You'll love the sporty, high-end look this upgraded splitter gives your pony's front end, so what are you waiting for? Be sure to order your complete front splitter kit now from CJ's!

Please Note: This front splitter is NOT designed to be used on the Performance Pack 2 Option, GT350 or GT350R.

Rally Innovations has over a decade in the rally car industry and is proud to bring their high-quality auto body products to your Ford performance vehicle! Each and every one of their products is cleanly designed, well-engineered, and durable yet functional, meaning that your Mustang will still have that legendary performance while having a more customized, aggressive look. CJ Pony Parts is proud to offer Rally Innovations products for your favorite Ford vehicle--browse our selection today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We're going to change up the look on the front of my 2018 Mustang GT with a custom three piece spoiler from Rally Innovations.

Unlike a lot of the spoilers on the market which are made of plastic, this Rally Innovations three piece spoiler is made of heavy 11 gauge aluminum. It comes in a black powder coat finish. This will fit the front of all 2018 Mustang GT and EcoBoost cars with the exception of performance pack 2 model.

For this installation, need a lift or a jack and jack stands or ramps, 1/4 inch ratchet, seven millimeter socket, 1/4 inch socket, ruler or tape measure, marker, drill, 1/8 inch drill bit, 5/16 drill bit, and safety glasses.

Going to begin installation by getting the car off the ground and we'll start by removing the screws here. Now it comes with two sets of instructions. There's instructions for a GT and instructions for an EcoBoost as they are slightly different.

Now you want to move inward, basically right where this curve is at the splitter. If you lift up, you push up, you'll see that little like rib section in there. We put this clip right up against it. Do the same thing for the other side.

Once you have the clip where it goes, going to grab our marker, we're going to mark the hole. There's four more mounting points we're going to use in the center here. What you've got to do though is pull down your splitter, and if you look, you'll see there's a little J clip in there. What you're going to do is line up your ruler with the center of it. Then you're going to mark half an inch in.

What you're going to do now is grab the center section of the splitter, hold it up against the four markings made. Make sure it lines up. Okay now we can remove these two outside clips once the holes are marked. Then we can drill.

Okay now we're going to drill all these holes. We're going to start with a pilot bit. Grab a piece of cardboard, piece from the box whatever, stick it up in there so we don't drill through. Now we'll drill the holes out to 5/16. Okay with the holes drilled, reinstall the clips.

We're going to start by putting the center piece up into place. You're going to grab the supplied screw and washer. All right now we're here for the side piece. What I found is easiest to do, start with the middle one here. Get that hand tight, that makes it easier to line up these two on the ends. Okay make sure everything is tight and just the way you like it and your installation's finished.

The Rally Innovations front splitter really adds a nice look to the front of the 2018 Mustang, without screaming look at me. It almost looks like an OEM part when it's installed. If you like the look, they actually make matching sides and matching rears to really finish off that look. As far as the installation goes, I'd say about an hour and a half or so, be back on the road in no time.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.