Ridetech Complete Coilover Suspension Kit With HQ Series Shocks Mustang 1965-1966

The shocks are only as good as the suspension system, so rather than sticking with simple dampening power, this Ridetech Level 2 Coilover Suspension Kit prepares your 1965-1966 Mustang for every corner. The high spring rate with coilovers allows for factory or lowered height with added caster to improve steering and handling at high speeds. Fine-tune your ride for more consistent and powerful breaking while reducing the amount of maintenance needed. This complete kit features StrongArm control arms, tall spindles, steering arms, inner and outer tie rods, a front MuscleBar, the 4-link system, and your choice of pin or hub spindles.

Features and Benefits:
- Bolt-in 4-link system combines R-joint rod ends
- Front MuscleBar sway bar uses PosiLinks to engage chassis & control arms
- Corrects ball joint angles with StrongArms and tall spindles
- Improves and corrected camber gain/suspension geometry
- Made in the USA
- Available with pin or hub spindles

The upper and lower StrongArms correct balljoint angles to increase camber gain and correct suspension geometry for a smoother drive. The TruTurn system enhances tire traction and virtually eliminates bump steer. Elevate your Mustang further with the included HQ series coilover shocks which feature a rebound knob under the hood. With this coilover suspension kit, you’ll experience less friction while enjoying better traction, lateral stability, full range articulation, and a quiet operation.

Kit Includes:
- Front upper and lower control arms
- Tall spindles
- Steering arms
- Inner and outer tie rods
- Front MuscleBar sway bar
- Bolt-in 4-link system
- Choice of pin or hub spindles

Please Note: The Front MuscleBar sway bar does not require any major modifications to the floor pan, but it does require minimal welding to the axle tube.