Ridetech Suspension System StreetGrip Mustang Big Block 1967-1970

Ridetech:
12105110

Highlights

  • Improves Ride Quality
  • Improves Handling
  • Composite Leaf Springs
  • Easy Installation
$2,915.00

Ridetech StreetGrip Suspension System for 1967, 1968, 1969 and 1970 Mustangs with a Big Block Engine.

This Ridetech StreetGrip Suspension System from CJ Pony Parts is an all-in-one kit to overhaul your classic 1967-1970 Big Block Mustang's suspension. Ridetech has designed a complete suspension system that gives you the best of both worlds: comfortable ride quality when you want it and firm, performance handling when you need it. Best of all, all the parts in this kit are direct replacements which make for an easy bolt-on installation!

Composite Leaf Springs can save your Mustang up to 50lbs in unsprung weight! These savings can greatly improve the handling and ride quality of your classic pony car. They even come equipped with billet leaf spring eyelets that you can flip to achieve your desired stance! The composite leaf springs design also provides more torsional strength which practically eliminates any dreaded spring wrap that can impact your Mustangs performance.

Features and Benefits:
- Improves Ride Quality and Handling Performance
- Composite Leaf Springs Provide Linear Spring Rate
- Taller Ball-Joints Improve OEM Camber Curve for a More Stability Through Corners
- Larger Diameter Front Sway Bar Minimizes Body Roll
- Ridetech HQ Series Vehicle-Specific Rebound Adjustable Monotube Shocks

The Ridetech Shocks feature a monotube design with adjustability that allows you to tune in the suspension for a softer ride or for a firmer, sportier handling suspension. The monotube design uses a single-cylinder where the fluid and pressurized gas are kept separate. This reduces the chance of cavitation, which can greatly impact handling performance. The monotube design is a higher pressure dampening system with a large piston that moves through the fluid and provides more consistent valving than a twin-tube design.

Ridetech worked closely with Hyperco to create a pair of dual-rate front coil springs that provide the best ride possible. Dual-rate coil springs provide a soft, smooth ride while out cruising, and a firm ride when taking a sharp turn. The softer spring rate lets your Mustang handle small road irregularities to provide maximum ride comfort. But when the spring compresses far enough from large bumps or cornering, the spring rate becomes firm to help control the bump or body roll.

System Includes:
- (4) Ball Joint Spacer Plates (12109520 and 12109521)
- (6) Delrin Control Arm Bushings (12109590)
- (2) Delrin Strut Rod Bushings
- (2) Control Arm Cross Shaft
- (2) Front Dual Rate Coil Springs (12102351)
- (2) Front Adjustable Shocks (12109515)
- (2) Rear Adjustable Shocks (12109510)
- (1) Front Sway Bar (12109120)
- (2) Delrin Sway Bar Bushings
- (2) Sway Bar End Links
- (2) Composite Rear Leaf Springs (12104799)
- (2) Leaf Spring Shackles
- (12) Delrin Leaf Spring Bushings (12105399)

The increased bar diameter of this Ridetech Front Sway Bar helps to control your Mustang's body roll as you go through a turn. This increases the handling performance and makes your car feel more planted to the road whether you are on some twisty back roads or at the track. Delrin bushings help to eliminate Stiction, allowing the sway bar to move more freely.

Delrin is Ridetech’s material of choice used for the composite leaf spring bushings. The Delrin bushings eliminate deflection and provide years of Stiction-free reliability. This greatly improves the ride quality and handling performance of your Mustang. Delrin is also outstandingly more durable than OEM rubber bushings and even polyurethane bushings. Shackles for the rear of the leaf spring are included with this set of bushings.

Polyurethane bushings can be squeaky and they tend to resist smooth rotation, which causes unwanted Stiction. Delrin eliminates Stiction and binding of the control arms movement. With direct-fit Delrin bushings, you get predictable and controlled movement. This allows the shocks and springs to do their intended job of providing suspension compliance, ride quality and performance handling.

Please Note: Convertible cars will require modification to utilize the staggered shock system.

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.